• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Reloading setups

Nice set up OP! I don't do a ton of reloading, but I really like this bench I fashioned out of two craftsman tool chests. Love the drawers that hold a ton of weight. My press is not bench mounted, but is on a movable stand so that I can move it in and out of the way when not needed.
IMG_3149.JPG
IMG_3150.JPG
IMG_3147.JPG
 
I needed to rearrange my room to add a gun safe so built a workbench for added counter top for working with rifle instead of on the kitchen table. This is the 3rd bedroom and is small, house is 960sf. Bench is 48x20x34 or 36 high, don't remember exactly. A lot nicer having a work space in the room to hold guns and arrow saw. The overhang on front allows me to clamp a small vise, case trimmer, etc items for temporary use. All from scrap material had laying around. Whole room is about a 9x11.
Here is a full 360° view of my room since that table picture wasn't that great. Room dimensions are actually 7.5'x11'.

20211001_081735.jpg20211001_081744.jpg20211001_081752.jpg20211001_081804.jpg
 
Nice set up OP! I don't do a ton of reloading, but I really like this bench I fashioned out of two craftsman tool chests. Love the drawers that hold a ton of weight. My press is not bench mounted, but is on a movable stand so that I can move it in and out of the way when not needed.
View attachment 301076View attachment 301077View attachment 301078
This is different and looks awesome! I have an old Snap On box in the garage that has become a storage shelf for the wife. I may integrate it in to my setup after seeing this!!
 
Nice set up OP! I don't do a ton of reloading, but I really like this bench I fashioned out of two craftsman tool chests. Love the drawers that hold a ton of weight. My press is not bench mounted, but is on a movable stand so that I can move it in and out of the way when not needed.
View attachment 301076View attachment 301077View attachment 301078
I, like your stand. What I did was get a break hub from a bus or big truck. Weld some rebar on the inside, fill it with cement. Turn it over and weld a pipe however long you want it to be. Weld it vertical in the center. you may need to put a plate over the hole if it is to big in dia. Then weld a plate on the top of the pipe. It is moveable, but you can do about any thing on it and it will not tip over.
 
Most of you guys are neat-niks compared to me.
Once I sold the '64 El Camino, I took over that bay in the garage. After I sold my motorcycles, my wife took over the other one.
Like a "where's Waldo" picture, where's the loading bench?
View attachment 301330
Not here to judge lol, I definitely spent time cleaning up my area before I took my pic!!
 
Nice set up OP! I don't do a ton of reloading, but I really like this bench I fashioned out of two craftsman tool chests. Love the drawers that hold a ton of weight. My press is not bench mounted, but is on a movable stand so that I can move it in and out of the way when not needed.
I particularly like the C channel mounting block you have for your Wilson trimmer.
 
They are little more full these days and a lot less organized. ;)
 

Attachments

  • 95E19557-4EEA-4013-AB5A-48FE9C572203.jpeg
    95E19557-4EEA-4013-AB5A-48FE9C572203.jpeg
    122 KB · Views: 223
  • 1EC63720-A5AE-4F2D-8A49-F8B93F11D275.jpeg
    1EC63720-A5AE-4F2D-8A49-F8B93F11D275.jpeg
    182.4 KB · Views: 223
  • 6F9C7055-32D0-43C3-986C-5C3FE27155F4.jpeg
    6F9C7055-32D0-43C3-986C-5C3FE27155F4.jpeg
    135.9 KB · Views: 219
  • A31B63E2-C5A9-4E3D-9FB6-A707A30348E6.jpeg
    A31B63E2-C5A9-4E3D-9FB6-A707A30348E6.jpeg
    144.7 KB · Views: 212
  • 18E710D8-204C-4734-84F7-8657C4D66480.jpeg
    18E710D8-204C-4734-84F7-8657C4D66480.jpeg
    163 KB · Views: 246
Last edited:
Top