338 builds (lapua/edge/or the like) lets see them.

View attachment 122304 Here is the latest two 338's in progress .
Left 338 Rum Carbon 30" Benchmark , Remington action timney trigger Hs Stock talley lights Leupold vx 3 6.5 x 20 x 50 .

Right , 338 Edge 30 " Proof terminator 3 Remington action , timney trigger McMillan carbon hunter 20 moa rail Burris Xtr ii 5x 25 x 50 in Warne rings . Both are almost ready to fire ! Load work to come when weather brakes ! Both are at 10.6 pounds .

what is the preferred action Length for a .338 Edge?

would a Wyatt's internal be sufficient with a 700 RUM Action To load long, or should we use a Clone?
 
Well I got some of the 338's together for a Family Portrait ! From the left !
1.338 Edge
2.338 Edge
3 .338 Rum [ wifes new Bear gun ]
4 .338 Edge my new Proof Rifle ! View attachment 122625 View attachment 122626
Rum man which muzzle brakes you got on those rifles. When I get my edge put together I know the exusti
Existing brake that is on the barrel I have will not be timed correctly so looking for options not big fan of self timing brakes some are ok but mostly just look odd. Thanks.
 
That is the factory Savage brake, I have a couple extra laying around if you want one.
The company I sent my barrel to to be carbon wrapped also did me the luxury of sending me one of their muzzle brakes (even though I didn't order one) and charged me an extra $100 for it. If you want it I'll make you a heck of a deal. It's a nice looking brake and from the design probably pretty good, better than the factory Savage.
Is it a self timing brake or can it be blended, machined to fit contour?
 
340 Zaylea Ann.

It's a 340 Weatherby Improved. Holds 112 grains of powder. Shoots the 236 hammer 3100 fps.
 

Attachments

  • BA76E79C-8FC3-43C8-9DF7-7AF312826F39.jpeg
    BA76E79C-8FC3-43C8-9DF7-7AF312826F39.jpeg
    77.2 KB · Views: 183
  • 00289AA1-699A-4C46-B2CD-A97AF09A7729.jpeg
    00289AA1-699A-4C46-B2CD-A97AF09A7729.jpeg
    1.6 MB · Views: 198
what is the preferred action Length for a .338 Edge?

would a Wyatt's internal be sufficient with a 700 RUM Action To load long, or should we use a Clone?
You could open it it up for the Wyatts box . I bought one but never installed it .
I have all mine single feed ...everyone is different in there thoughts of a few extra rounds . I can feed one in fast enough for my type of hunting .
Rum Man
 
Rum man which muzzle brakes you got on those rifles. When I get my edge put together I know the exusti
Existing brake that is on the barrel I have will not be timed correctly so looking for options not big fan of self timing brakes some are ok but mostly just look odd. Thanks.
My favorite muzzle brake is the terminator, I have both the T-3 and the t-4 and they are Amazing. They are not self timing brakes.
Rum Man
 
Last edited:
338LM
Defiance Ruckus Tactical, .750" bolt, 20MOA integrated rail
Preferred Barrel Blanks .900" taperless, 1:8" twist, 5R rifling, double diamond flutes cerakoted OD green, 26" finish length, MBM 5-port Beast, tapered to .900"
Manners EH1A with MCS-DBM long action mini chassis, CIP length
TriggerTech Special
ZCO ZC527-MPCT3 in a Spuhr SP-6601, LRA Send iT MV3 with S90 bracket, Aadmount caps
Atlas CAL BT65-NC in Area 419 Arcalock clamp
Area 419 12" Universal rail with barricade stop

20200903_145326.jpg

15lbs empty with mag and bipod
 
Well I cant remeber if I posted the final set up with one of my 338 Edges so here it is .
20200410_110108.jpg


It's a Remington action single feed , bolt face trued , lugs lapped , timney trigger , 29" Kreiger heavy Palma flutted , radial brake ,
Bell &Carlson A5 adj. Stock , 55 moa base , 8/40 , topped wit with a Valdada 200 min. adj. base with two sets of Vortex Precision rings , a Vortex Razor gen 1 5x 20 x 50 .
Just about 325 min. Of Elevation adj. available.
Seems to love the 300 gr bergers OTM , H-1000 , Remington brass , Cci mag 250 primers @ 2849 ft.per.sec.

I choose to shoot from a bench because of my Open Heart Surgery. It kills me to lay Prone .
This set up has produced three in the same hole at 100 yrds. and a 26 3/4" three shot group at 3027 yards ! My personal best to date ! She sets as is at 19.2 pds .
It has smacked steel at 1500 yrds, 1 mile , 2053 yrds and out to 3027 yrds .
It has been a Challenge to say the least !

Here is a picture of the long shot area . Cant thank my Buddy's enough for help getting the Target up that Mountain!!
20200607_175534.jpg


Thanks for Looking !!

Rum Man
 
what is the preferred action Length for a .338 Edge?

would a Wyatt's internal be sufficient with a 700 RUM Action To load long, or should we use a Clone?

I don't know if there are magazine window dimensional differences between a stock R700 and a clone. I can tell you I built a repeater using a Stiller Predator (R700 footprint). I used the long Wyatt's box. I had to machine the action to lengthen the mag window on the back end significantly. I don't have a mill so a Dremel and a lot of patience used. The gets the Wyatt's box to fit. Then I had to modify the bolt stop to let the bolt come back further to pick up the rounds. They feel lips on the Wyatt's box were sharp and needed some work but it feeds reliably.
 
Well I cant remeber if I posted the final set up with one of my 338 Edges so here it is .
View attachment 215679

It's a Remington action single feed , bolt face trued , lugs lapped , timney trigger , 29" Kreiger heavy Palma flutted , radial brake ,
Bell &Carlson A5 adj. Stock , 55 moa base , 8/40 , topped wit with a Valdada 200 min. adj. base with two sets of Vortex Precision rings , a Vortex Razor gen 1 5x 20 x 50 .
Just about 325 min. Of Elevation adj. available.
Seems to love the 300 gr bergers OTM , H-1000 , Remington brass , Cci mag 250 primers @ 2849 ft.per.sec.

I choose to shoot from a bench because of my Open Heart Surgery. It kills me to lay Prone .
This set up has produced three in the same hole at 100 yrds. and a 26 3/4" three shot group at 3027 yards ! My personal best to date ! She sets as is at 19.2 pds .
It has smacked steel at 1500 yrds, 1 mile , 2053 yrds and out to 3027 yrds .
It has been a Challenge to say the least !

Here is a picture of the long shot area . Cant thank my Buddy's enough for help getting the Target up that Mountain!!
View attachment 215680

Thanks for Looking !!

Rum Man
Definitely a long ways nice shooting.
 
View attachment 122714 View attachment 122715


.338 Edge - Budget Build
Savage LA single shot
McGowen 30" Fluted Barrel
Choate Stock
Vortex Viper PST 6-24x50
TPS Steel Rings on Warne Steel Base

Custom Cheek Rest, Tactical Bolt Knob,
Scope Level, and Timed 4 Port Brake all machined one off's by me.

Very Accurate with 300gr SMK's or Nosler Custom Competitions over H1000.
How much does that set up weigh with the choate stock.
 
Top