338 builds (lapua/edge/or the like) lets see them.

[David Lindler]

My 338 edge.
Gunwerks GBR action with 20 MOA rail
Proof Research 28" carbon barrel
T-3 terminator muzzle brake
Bell & Carlson M-40 stock
Timney kelvin elite trigger @ 8oz
Night Force SHV 5x20x56 scope with MOAR illuminated reticle
Hawkins bottom metal
Black and gray KG Guncoat finish.
150 rounds through barrel
Gun with scope, dies, brass and custom load data
$5500.00 or best offer
3 shot group @ 100 yards
Call me at 864-941-6643 for more information

 

[shawnb]

Got a weight on that rig David?

 

[David Lindler]

Got a weight on that rig David?

A round 11lbs. Very well balanced.

 

[waspocrew]

Great job on your diy camo job! I need to learn

Thanks! It's pretty straight forward to do. Give it a try, I think you'll have fun!

 

[buster2765]

savage 112 magnum target action(single shot), McMillan Game hunter stock in Gap Ambush camo, Proof Research 24inch carbon barrel. Chambered by LRI 338 LM, LRI Cathedral Muzzle break. EGW 20 moa rail, Vortex Razor HD 5-20x50 scope with Vortex rings & Harris bipod. Weight is 12.5 lbs with everything

 

[C.O. Shooter]

10 months, no builds!

 

[surgeon260]

SAC-built 338 Lapua improved.

 

[Bravo 4]

I have been trying to get a 33XC up and running. Had one shooting really well sending 300 grain Bergers at 3150 out of a 26" barrel with a very comfortable load. The rifle weighed 11.6 pounds bare and I wanted it lighter so sent the barrel off to a company to get carbon wrapped. It came back 2 pounds lighter but unsafe to use. They started the carbon wrap too far back over the chamber. Last I heard (over a month back) was they were gonna replace the barrel, haven't heard back. Looks like I'll have to order a new barrel for my birthday next week...what a waist! My reamer, dies, and brass are getting lonely.. Waisted probably a year on this too.

 

[clemens]

Nothing fancy with this over the counter Savage 110 FCP. It has a 20 MOA rail. The scope is a Nightforce 5.5X22X56 NSX. I have a backpack style sling from the Longrange store.

Which muzzle brake is that, does it come in stainless or a matte stainless glass bead finish? Very nice. Building 338edge on savage 110. Work in progress.

 

[surgeon260]

Gradous-built 338 Norma improved.

 

[surgeon260]

That's all I got.

 

[Bravo 4]

That's all I got.

That's all you need!
Very nice!

 

[J E Custom]

Here Is one of the 338 Texans that I designed and built, A very good friend has One and he wanted to build the stock Himself. Here is the post that describes the rifle and the test results.
Go back to post #1 of this link for some reason it wants to open farther down.

Introducing the 338 Texan

A long awaited plan was finally finished this week. I finally finished the stock on what's been a dream ever since JE Custom showed me the reamer drawing. The 338 Texan is a 338-375 Remington Ultra Mag improved. The H2O capacity is 119 grains. Jerry built this rifle on a Weatherby Mark V action...

www.longrangehunting.com

My intention was to push a 300 grain bullet over 3000 ft/sec with lower pressure (62,000) Jayson pushed it to over 3,100+ with no real pressure signs. I have my own and when I find the pictures I will post them. Another friend that lives in Florida, also has one.

J E CUSTOM

 

[Bravo 4]

Which muzzle brake is that, does it come in stainless or a matte stainless glass bead finish? Very nice. Building 338edge on savage 110. Work in progress.

That is the factory Savage brake, I have a couple extra laying around if you want one.
The company I sent my barrel to to be carbon wrapped also did me the luxury of sending me one of their muzzle brakes (even though I didn't order one) and charged me an extra $100 for it. If you want it I'll make you a heck of a deal. It's a nice looking brake and from the design probably pretty good, better than the factory Savage.