6.5 PRC Sherman Improved

[Justice1327]

As far as I know, I think the reamer Travis @ TS Customs used is a .105" freebore. As for loading, just a simple neck down - I used a .269" bushing on Lapua brass. I think @Huntnful uses a .270"? For a wildcat, this one is about as simple as it gets. Check out this link to Huntnful's journey with it - he gives far more detail and some kills with it.

6 PRC

Have spent just a little time behind this cartridge now. Rifle was built by TS Custom. KS1 Adjustable Stock Bartlein 7.5 twist 24” Rem Varmint Lone peak Fuzion Alpine cut M5 with hinged floor plate March FX 4.5-28X52 I’ve only tested H4831SC so far because I like how consistent and clean...

www.longrangehunting.com

Thanks and yes,mine is from Travis and i have checked out the info you provided. I had one that was for the longer 115 DTACs, but it did pressure out and I wasnt happy with the velocity. very happy so far with my current set up, but would like it to be set up to shoot the 105-108's. Maybe next barrel.

 

[bowhunter1287]

Any new load data 6.5 prc/si and not the 6 prc

 

[wasskeet]

Any new load data 6.5 prc/si and not the 6 prc

Here's probably the best reference:

New "Test" rifle REVEALED: 6.5 PRC SI (Sherman Imp)

I am building a new rifle to test a new case design. I will preface it by saying this is not my design. But I was asked to be the beta tester for it. I cannot say much about it yet but will be in the future once testing begins. I am currently waiting on the reamer to be completed, so my...

www.longrangeonly.com

 

[bsnyder]

I can add my personal build has been completed for about 9 months it's taken two antelope and have tried a couple different pills. This gun is a 20 inch 7.5 twist it's since changed scopes

I will more than likely play with 140 eldms this winter after elk season and 135 jlk's and possibly the 153 atips and 140 vld's.

61.5 grains of n560 and 135 atips 3148 fps
60 grains of n560 and 147 eldms both seated to 2.950 3015fps

 

[bowhunter1287]

That's a good looking rifle