25 PRC

Just picked up my 7PRC ADG brass. This will be great for the 6.5-7PRC. I ordered the barrel on 7/28. I also think a 25-7PRC would be perfect for a 16" barrel. I will stay with the 25-6.5PRC for now since I have a 22" barrel and 250 pieces of brass. Lots of choices out there.
 
Some photos of the 25-6.5prc with a 135 Berger at 3.0". Then the 6.5prc case next to the 7prc case both with 135 Bergers. Lastly the 7prc will fit just fine in the Hunter mag with the spacer kit. 3.290" would be around max length with the spacer kit installed.
 

Attachments

  • IMG_1536.jpeg
    IMG_1536.jpeg
    183.8 KB · Views: 207
  • IMG_1540.jpeg
    IMG_1540.jpeg
    160.2 KB · Views: 221
  • 71341495738__0CECC17B-0A11-46C2-9FF3-A0F4347D9E4F.jpeg
    71341495738__0CECC17B-0A11-46C2-9FF3-A0F4347D9E4F.jpeg
    114.7 KB · Views: 221
I have a 22" carbon six sendero barrel. Only 104 down the tube. 6.5 PRC ADG brass necked down in a Redding 6.5PRC full length type s bushing die and then mandrel. 57.5 grains of N565 with a Berger 133 is avg 3050FPS with CCI BR2.

Mine is on a Kratos action, but I am moving it to a Terminus LA Zeus QC. I have an 18" barrel I will be chambering as well. Wanted something even shorter for my suppressor. Took a deer with it in Michigan in November. It's a fun gun to shoot. Originally I had it on BDL, but I just purchased Hawkins Hunter DBM and mag to run it.

Edit: The barrel was chambered by Straight Jacket Armory.
Was that your end for powder? I'm about to fire form. Any thoughts on starting load? Thanks
 
Top