Oh yea, bottom metal! I was leaving that to the suggestion of the gun smith. If anyone has a suggestion with this Manners LRH Long Action stock that would be great.
What am I Missing 6.5x284
- Thread starter Csbc4fun
- Start date
Help Support Long Range Hunting Forum
I have a lead on some H1000.
What type is inlet for? BDL or DBM?
I run 57gr H1000 with the 140 Berger and Lapua brass. It's a hot load so work up.
H4831SC works well for me also.
H4831SC works well for me also.
Mine has always been DBM but I shoot a few targets with it as well strictly hunting I might want a BDL
My personal favorite powders for the 6.5x284N are Retumbo(2975-3025FPS) and H4831sc(2900-2950FPS). My most used bullets. Berger 140HVLD, 140/142 JLK VLD, Berger 156EOL.
captainemil
Well-Known Member
- Joined
- Sep 29, 2010
- Messages
- 300
Man about 10 years ago I was watching Best Of The West and J Winters shot a Elk at 978 yds and jumped up and said the long range hunter did it again, This is our new 6.5x284 Norma, I called him up and ask him about a build, He told me about a Broughton barrel 1-8 twist 5c ,Remington action ,Timney trigger and made my own stock. Today my longest kill is with that 6.5 is 918 yds couple in the 800's a bunch in the 5-600's, This gun shoots 140 vld hunting bullet 1'' group at 400 yds. So needless to say you have started off with a Monster Winner you will not be disappointed at all.
Mike Matteson
Well-Known Member
You are off to a great start. The H4350 is a winner, and H4831, and possible H1000 you can't go wrong. Those powders are very temp stable.
Huntz
Well-Known Member
You are missing shooting time.Sometimes planning gets in the way of what is really important!
Thanks for the encouragement and all the great load data. I do have 5 pounds of RETUMBO I could try. I'm getting some H1000 and I am dangerously low on H4350, just went below 25 pounds.
I would like an hinged floor plate smooth looking bottom metal, not a detachable bottom magazine. I don't really know how that fits up to the stock I have. Need help from my gunsmith on that issue.
I really appreciate the help guys!
I would like an hinged floor plate smooth looking bottom metal, not a detachable bottom magazine. I don't really know how that fits up to the stock I have. Need help from my gunsmith on that issue.
I really appreciate the help guys!
Attachments
I shoot every Thursday, plus a squirrel shoot every couple weeks, plus additional shooting days with friends that can't go on Thursdays. I know, I should be shooting every day that ends in a "Y".
If you have the build sheet for the stock it will tell you what a inletted for. Should say BDL or DBM/M5. You need to know that before ordering a bottom metal. If it's inlet for DBM/M5 a hinged floor plate will not work in most cases.
Looks like your action is setup for Wyatts Extended box so I'm assuming it's a BDL (type you said you wanted) type inlet in the stock. Assuming the stock was inlet for that specific BAT action. Going to be a sweet setup for sure!!!!
