Need reloading help

Not that you will have the same experience, but my 30-06 shrunk from 0.77 moa at 0.020" jump to 0.4 moa at 0.075" jump with 150 Accubond pushed by 58 gr RL16 lit with WLRM primer.
Interesting. I am loading 0.20" off right now, 150 grn BT. Maybe I should try seating depth next.
 
FWIW, I went from 0.020" to 0.015" and the group opened up. Then I started at 0.050" and went longer to 0.080". 4 shot groups got nice and tight at 0.070" and 0.075". I did pull one low at 0.070".
It's the rifle my daughter uses, Shots are 90-130 yards. But I can still play with it, maybe after deer season, I am using 60 grns of H4831 for mine in an M70 classic
 
Not that you will have the same experience, but my 30-06 shrunk from 0.77 moa at 0.020" jump to 0.4 moa at 0.075" jump with 150 Accubond pushed by 58 gr RL16 lit with WLRM primer.
Wow I'll definitely be trying to deeper seated ones as well. I'd be ecstatic with .4s with this set up.
 
No where close to the speed it "should be at" according to the book but a couple of flat spots I'll play with before I decide to push it further. Zero pressure signs well over book max.
F455C97A-6006-4669-84E1-1085DC47BEF2.png
 
Without the COL as shot + the case volume QL can be off by quite a bit. With the 49,5gr load and speed of 2864fps the indications are that 49,2 and 51,3gr might be close to a node.
 
Without the COL as shot + the case volume QL can be off by quite a bit. With the 49,5gr load and speed of 2864fps the indications are that 49,2 and 51,3gr might be close to a node.
Interesting I was wondering where the next node would fall. According to the book 49.5 should yield 3000fps at sammi OAL. I'm almost 1200 FPS off from that. I ran the ballistics earlier and was sorely disappointed with a 110 running at 2880 BUT it would work for this trip. I may still be able to squeak one more test trip to the range.

And thanks for that info by the way!!
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top