Lack of load data for 7mm prc from Nosler

[Cholla]

Please tell us how they shoot. Also, could you measure the BTO? I'd be interested to know the seating depth. Thanks!

My rifle doesn't like them. But my rifle doesn't like any factory ammo. The Base to tip is 3.203". I will get the Base to ogive today.

 

[deputyrpa]

My rifle doesn't like them. But my rifle doesn't like any factory ammo. The Base to tip is 3.203". I will get the Base to ogive today.

Thanks!

 

[Cholla]

Base to Ojive is 2.536 using a Hornady comparator.

 

[deputyrpa]

Base to Ojive is 2.536 using a Hornady comparator.

I appreciate it! Comparing their factory loads to my handloads, it's interesting that they jump those bad boys quite a bit. I got my best accuracy at a BTO of 2.643", with average 2923fps and an ES of 4. The shortest I loaded was 2.563" BTO, and with the same charge weight, averaged 2850fps with an ES of 11.

 

[Countrykang8]

I developed a load with ADG brass, CCI34, 175 ABLR, 78.8gr of LRT, and a 3.30 COL. This load runs a little over 3000 fps and groups sub-MOA.

 

[Countrykang8]

Another load is complete. CVA Cascade Long Range Hunter 24" barrel.
175 ABLR
N570 73.3gr
CCI34
ADG brass
COL 3.30"

This load is running around 3025 fps with no pressure signs. Shot it out to 1024 yards last month.