I have used the 215 on 3-4 animals. I liked the 215 performance better than the 210 VLD. Had some trauma on the entry side of caribou ribs that was surprising. But not a lot of meat to be damaged on a ribcage. My 215s all expanded, but by then I'd already meplat uniformed and countersunk the tips with Kevin Cram's tools.
I've shot game with 168gr .284 VLDs, 210gr .308 VLDs, the 215gr .308 Hybids, and the 300gr .338 OTMs.
Simply had too many disappointments in the first 15 animals to continue any further with them. Some didn't expand, some grenaded with shallow penetration.
After meplat uniforming and countersinking all the tips, I think mine all expand now. But I'm only comfortable using them on completely broadside shots thru the middle of the ribcage.
My lathe-turned monolithic copper bullets work just as well as the Bergers on the broadside rib shots, and much better than the Bergers on all the other shot profiles I experience, from point blank, out to 800-900yds, which is about as far as I shoot. No problems getting 1/2moa accuracy, which is all I require.
So why limit my shot opportunities, when the perfect broadside shot profile doesn't always present?
Anyhow, that's a summary of how I ended up where I am. The one good thing about my Berger experiences is they caused me to move on to copper monolithics. Been very happy with them the past 4 years. Doesn't mean they're best for anyone other than me. Others experiences are just that. If they lead them to a different endpoint and conclusion - fine.
If a guys gonna concentrate on shots past 1000yds, the Bergers may be the good selection. Hard for copper monolithics to compete with the lead core jacketed bullets past 1000yds.
I've shot large game animals with bullets for more than 45yrs. Seen quite a few different bullets used, by myself and others. The limited meat damage from my lathe-turned copper bullets is almost dumbfounding. Just about has to be seen to be believed. Over the past 4 years, they've also proven deadly - lethal. Wish they'd been available for my use years ago.
.
The lathe-turned copper monolithic bullets are a better long range bullet than the Barnes copper bullets, in my experiences. Tighter tolerance control during manufacture leads to a bit better consistency/accuracy, and higher BC values help a guy hit at longer yardage. I've used Barnes bullets and have some on my shelves. Use them for closer range encounters, but don't develop long range loads with them.
I've shot game with 168gr .284 VLDs, 210gr .308 VLDs, the 215gr .308 Hybids, and the 300gr .338 OTMs.
Simply had too many disappointments in the first 15 animals to continue any further with them. Some didn't expand, some grenaded with shallow penetration.
After meplat uniforming and countersinking all the tips, I think mine all expand now. But I'm only comfortable using them on completely broadside shots thru the middle of the ribcage.
My lathe-turned monolithic copper bullets work just as well as the Bergers on the broadside rib shots, and much better than the Bergers on all the other shot profiles I experience, from point blank, out to 800-900yds, which is about as far as I shoot. No problems getting 1/2moa accuracy, which is all I require.
So why limit my shot opportunities, when the perfect broadside shot profile doesn't always present?
Anyhow, that's a summary of how I ended up where I am. The one good thing about my Berger experiences is they caused me to move on to copper monolithics. Been very happy with them the past 4 years. Doesn't mean they're best for anyone other than me. Others experiences are just that. If they lead them to a different endpoint and conclusion - fine.
If a guys gonna concentrate on shots past 1000yds, the Bergers may be the good selection. Hard for copper monolithics to compete with the lead core jacketed bullets past 1000yds.
I've shot large game animals with bullets for more than 45yrs. Seen quite a few different bullets used, by myself and others. The limited meat damage from my lathe-turned copper bullets is almost dumbfounding. Just about has to be seen to be believed. Over the past 4 years, they've also proven deadly - lethal. Wish they'd been available for my use years ago.
.
The lathe-turned copper monolithic bullets are a better long range bullet than the Barnes copper bullets, in my experiences. Tighter tolerance control during manufacture leads to a bit better consistency/accuracy, and higher BC values help a guy hit at longer yardage. I've used Barnes bullets and have some on my shelves. Use them for closer range encounters, but don't develop long range loads with them.