Classic Hunter Receivers by TL TECHNOLOGIES

[grandslamsheephunter]

CLASSIC HUNTER RECEIVERS, Lyons Gunsmithing . All receivers are checked with CMM machine to assure quality
tolerances throughout, We are offering short actions with standard bolts and mag bolt face, long actions mag and standard bolt face bolts also a.588 bolt for the Lapua
Complete receiver includes 20 moa rail ,recoil lug,follower $ 750.00
, Contact us for options available and info.
[email protected] PH 610-603-6760
Thanks

 

[ohiohunter]

Can you single feed these?

 

[grandslamsheephunter]

Can you single feed these?

Yes they can be single fed very by changing the extractor angle slightly and polishing the extractor face this would not interfere with CRF feeding
Thanks for you interest Jack

 

[kfreeze]

Any left hand stuff available yet?

 

[Joel Russo]

May want to check the website rules regarding becoming a site sponsor if you want to sell your products.
Unless you are a paid Sponsor you may not do anything on the site designed primarily to promote your own business.
Send an email to Len or admin, they can set you up for sponsorship!

 

[Garett]

Darn it. Have one that'll fit savage short shank barrels I just ordered a barrel Sunday would have went remage if I knew this was going on

 

[grandslamsheephunter]

Any left hand stuff available yet?

No Tl is not going to make left handed receivers Thanks for your interest

 

[SofaKing]

Local gunsmith has one in for a customer build. Looks good. I believe he got his with a bolt knob, bedding blocks, and lug.

 

[grandslamsheephunter]

I am in contact with Andy B. I am planning to sponsorship
Lyons Gunsmithing as TL is coming out with some new features and .223 receivers
Right now is running full speed to keep up with our orders,

 

[highdrum]

Jack, how have the 0.588 bolt faced actions worked out for lapua/rigby based builds? ImIIset to receive my first mag la format in 10 days or so.

 

[grandslamsheephunter]

Thanks Andy, with setting up my sponsorship

 

[Earnhardt]

Do these actions have 6-48 or 8-40 screw threads for bases?
How much to open the feed lips up for a 300 RUM?
How much to open the action up for a Wyatt's CFE-9 3.99" DBM?
How much to polish the action? Versus cerakoting it?
Thanks

 

[grandslamsheephunter]

Hello, these have 8x40 screws ,feed lips do not have to be opened for the .300RUM
Open for Wyatt Extended box $40.00 with ejector modifications
Polish $50.00 CeroKoat $100.00, email me at [email protected] for more info
and other options and price. Contact 610-603-6760 Thanks

 

[Earnhardt]

Do the actions have a standard Remington scope base screw spacing?
Is the bolt threaded so you can add an aftermarket bolt knob if you want?
Is the maximum size the action can be opened up for a Wyatt's box 3.825" (MBE-3), or can the action be opened up to 3.99" (CFE-9)?
How long would the threaded portion of the barrel Tenon be in this action?
Do you have a website link that would show all of the data specs for the TL action?
Thanks