I was debating custom 7 SAUM, RM, or factory .280ai. I ruled out WSM on brass availability. Ended up with a Seekins 7prc after it was released and basically solved all the various slight drawbacks I saw with the rest. It was just the easy button. Peterson brass, 180 eldm at 3000 fps should more than get the job done for anything I'm likely to do with it.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
7 wsm or 7 saum
- Thread starter IDhunter0990
- Start date
Help Support Long Range Hunting Forum
fta0303
Well-Known Member
Can you form the 7 WSM brass from 300 WSM brass?
ntsqd
Well-Known Member
As I recall making 7-300 WSM from 300 WSM is a simple neck-down.
Making 7 WSM from 300 WSM requires either fire-forming or a hydraulic die due to the neck-shoulder junction of the 7 WSM being further forward. Neither is a deal-killer, but it is another step or steps depending and is why I decided that the 7-300 WSM was my own choice.
Making 7 WSM from 300 WSM requires either fire-forming or a hydraulic die due to the neck-shoulder junction of the 7 WSM being further forward. Neither is a deal-killer, but it is another step or steps depending and is why I decided that the 7-300 WSM was my own choice.
Browninglover1
Well-Known Member
7 SAUM is the easy button. Mine has been PHENOMENAL.
However if I was starting over I'd probably do a 7-6.5 PRC. Neck up the 6.5 and roll with it. It's doing great things in F class and brass is easier to come by.
However if I was starting over I'd probably do a 7-6.5 PRC. Neck up the 6.5 and roll with it. It's doing great things in F class and brass is easier to come by.
Wsm wins a lot of benchrest. Buy a lot of brass and go shout out a barrel. Smokes the prc in a short or medium action
7SAUM, BAT Vesper medium action and Unknowm Muntions bottom metal and long mags.
Pick the barrel and stock of your choice and enjoy.
Pick your bullet of choice and have your reamer made to properly seat the bullets in the case.
Pick the barrel and stock of your choice and enjoy.
Pick your bullet of choice and have your reamer made to properly seat the bullets in the case.
You can if you don't mind mis-headstamped brass.
Longshotjames
Well-Known Member
Great content here! How about thoughts on the 7mm-6.5prcW for lots of brass availablity of the 6.5prc ?
How does the 7-6.5prcW stack up to the SAUM and WSM's ?
James
How does the 7-6.5prcW stack up to the SAUM and WSM's ?
James
Browninglover1
Well-Known Member
This is the route I'd go if I was starting over today. But I still LOVE my SAUM
Justice1327
Well-Known Member
My cartridges hold the below H2O
7/6.5 PRCC - 69.1
7SS - 72.7
7 Max - 77
7 WSM - 80.8
7 Mega - 82.9
7/300 Practical - 90
My .284 #5 is under construction.!
Between it and .257 I need a therapist I think
Yes you can just need to false shoulder or jam bullets on first firing.
I don't think there is really a difference, but...I shoot several throated WSMs with 26 inch barrels, one with a 28. Absolutely love the caliber. Brass has never been a problem as I neck down 300 WSM brass, then give it a fireform. Never has a problem. I shoot 168 LRX's in all of them from 2975 - 3150 fps. With a long action, you can defined your freebore.
Good Luck!
Good Luck!
I think a .257 is calling my name soon. Maybe wildcat.
