.2-.3 100 yard cold bore challenge

Well it was nice yesterday and I spent a little of it banging out some reloads. I just "had" to shoot that fourth round! 224 valkyrie, 75gr Hornady BTHP behind 27gr of CFE 223
 

Attachments

  • 20200403_154215.jpg
    20200403_154215.jpg
    1.3 MB · Views: 213
Went to the range today with girlfriend. I shot six rounds. Remington 700 5r 300 win. mag, 26" barrel, front bipod, rear bag, on the bench. Federal premium with 185 Berger hybrids at 100 yards. Group measured out 5/8" x 5/16".

First three shots in slow succession. Labeled 1, 2 and 3.
KIMG0223.JPG


4th shot fired cold after checking first three.
KIMG0226.JPG


5th shot cool.
KIMG0227.JPG


6th shot cool.
KIMG0228.JPG


KIMG0224.JPG

KIMG0225.JPG
 
Got my 270 sherman dialed in with Retumbo and 170 bergers a while back. 3040fps average. Three shots starting cold fouled bore. Repeated it yesterday with a very similar group but didn't take a picture for some reason...
IMG_3293.JPG
 
From a trip out to the mountains yesterday...and this was just during routine load development/tweaking. I think I found a couple keepers. Doesn't meet the "cold bore" requirement but, I was happy regardless.
6.5 PRC - 142 ABLR - 56.8gr RL26 - 3083fps
142 ABLR (PRC).jpg

308 - 165 SST - Varget - 2748fps
165 SST.jpg

30-06 - 190ABLR - 54.3 gr RL16 - 2760fps
190ABLR (30-06).jpg
 
Brand new Remington 5R 20" barrel bone stock in .308 Win. First trip to buddies 120 yd range for load development. 2nd 5 rd string of hand load development using Peterson Brass, IMR 4064 and Sierra MK 168gr.

u1eCTGw.jpg


kb05rRK.jpg


Top left was Federal Match- last 5rd break in shots. Cleaned rifle, took a fouling shot then load tested. Top middle first test, 5 rds, top right 2nd 5rd string, bottom left third 5rd string started to feel a little pressure.

Only 30 rds down tube so far.

Edit- sorry didn't realize cold bore until now.
 
Last edited:
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top