6.5 PRC build

thaught · Dec 28, 2019

I'll be building a 6.5 PRC in either a Defiance action or lone Peak. What length of do y'all reccomend? Medium or Long? I think short action won't load me enough to seat the bullets out.

Jud96 · Dec 28, 2019

I would do a medium action.

chetraguse · Dec 28, 2019

I'm building this exact gun on a lone peak titanium long action 26" 1-8 twist proof with a axial precision stock and a T3 Terminator break.

Liddy · Dec 28, 2019

I just finished a Defiance Rebel XM, Defiance XM (Sunny Hill) BDL bottom metal, 24" Proof Sendero 1-7:5 tw, Hawkins muzzle brake, Trigger Tech Special set at 2LBS, Manner's EH-1, Talley LW rings with bubble level and a Zeiss V6 3-18X50. I have not shot it yet but plan on working up loads using 156 EOL Berger, ADG Brass and VV N565. I use Phoenix Custom Rifles to do all of my smith needs, Keith and Brad Johns have done a great job on 9 custom builds so far.

Liddy · Dec 28, 2019

Liddy said:
View attachment 165500 View attachment 165501 I just finished a Defiance Rebel XM, Defiance XM (Sunny Hill) BDL bottom metal, 24" Proof Sendero 1-7:5 tw, Hawkins muzzle brake, Trigger Tech Special set at 2LBS, Manner's EH-1, Talley LW rings with bubble level and a Zeiss V6 3-18X50. I have not shot it yet but plan on working up loads using 156 EOL Berger, ADG Brass and VV N565. I use Phoenix Custom Rifles to do all of my smith needs, Keith and Brad Johns have done a great job on 9 custom builds so far.

This is a 6.5 PRC with a .188 fb reamer

chetraguse · Dec 28, 2019

Liddy said:
This is a 6.5 PRC with a .188 fb reamer

I'm doing the same fb on mine should be good for the heavier 6.5's.

elkaholic · Dec 29, 2019

happyshootin · Saturday at 10:01 AM

I know it's an old thread -anyone have feedback on getting AICS mags to run 6.5 PRC on a long action? I want to do a Lone Peak LA for 7 PRC, but also want to spin up a 6.5 PRC barrel. I have heard good & bad experiences feeding.

Thanks!

highdrum · Sunday at 10:14 AM

happyshootin said:
I know it's an old thread -anyone have feedback on getting AICS mags to run 6.5 PRC on a long action? I want to do a Lone Peak LA for 7 PRC, but also want to spin up a 6.5 PRC barrel. I have heard good & bad experiences feeding.

Thanks!

Hawkins hunter magazine with short mag spacer kit. Works great.

6.5 PRC build

thaught

Well-Known Member

Jud96

Well-Known Member

chetraguse

Well-Known Member

Liddy

Well-Known Member

Liddy

Well-Known Member

chetraguse

Well-Known Member

elkaholic

Well-Known Member

happyshootin

New Member

highdrum

Well-Known Member

Similar threads

Recent Posts