Where do you find their load data for 223, 1:9 bolt action?
Nosler 64 grain
- Thread starter Stadoc
- Start date
Help Support Long Range Hunting Forum
What's your accuracy with that load?
HeyWho
Member
Nice, thanks for the info my friend.
- Joined
- Nov 25, 2012
- Messages
- 312
- Joined
- Nov 25, 2012
- Messages
- 312
Not that I'm aware of. Jake at RMR just steered me to the Lee Manual and I've been successful at finding loads for all of their bullets there.
The 69gr 3GH RMR bullets work better on game than I thought they would, from Coyotes to big Feral Hogs.
I haven't used a lot of them but have killed quite a few coyotes and a few hogs and they provided good penetration and enough tissue damage to put stuff down quickly.
Some of the bonded core stuff will pencil through a skinny Coyote or a Bobcat, but the 3GH works well. They are NOT fur friendly!
Ed
HeyWho
Member
Hey Ed,
Do you have any Load Data for the 69gr RMR projectiles by chance?
I'm going to give them a go next.
Thanks for the information
Josh06
Well-Known Member
It's right around 1-1.5 inches at 100 consistently.
wvbearhunter
Well-Known Member
I use them in 223 with varget and they are fearsome. Absolute murder on deer and coyotes
- Joined
- Nov 25, 2012
- Messages
- 312
24.7gr TAC is my favorite, but 25.5gr of Varget works well too.
I just save my Varget for other cartridges.
Usually I use CCI-400's for the TAC load, but I have tried the CCI-450's and got the same accuracy but no issues with pressures.
My c.o.a.l. for this bullet is 2.265" which requires the ASC magazines for my AR's.
My Ruger American Ranch Rifle (Gen 1 with the horrible rotary mags) likes the load too but the rounds are too long for the mags so it's a single shot with them.
Ed
- Joined
- Nov 25, 2012
- Messages
- 312
I might add that all my AR's have Black Hole Weaponry polygonal rifled barrels chambered in .223 Wylde.
The Ruger Ranch rifle is the exception to bunch.
Ed
The Ruger Ranch rifle is the exception to bunch.
Ed
And the accuracy?
I did the 3 gun matches for years. RMR might not be the clover leaf shooter in a highly specialized bolt gun, but neither are my AR's with match grade 20 inch SS fluted barrels. I have shot 1500 rounds of 5.56 pressure in 3 days on several occasions and buy bullets by the 1000, 2000, and 5000 lots. I generally use 69 gr RMR. They are really hard hitting and can do some damage. 3000 fps using 2000 - MR
