I don't own a .338 can. I have 2 .30 cal cans: Omega300 and Enticer S. I love both of them. The Enticer has great sound.
Looking for Suppressor Advise
- Thread starter coach p
- Start date
Help Support Long Range Hunting Forum
Stugots
Well-Known Member
One more for the TBAC 338 Ultra. Currently, you will own no better can in .338 cal. and is next on my list to own.
and my 2nd can is a TBAC .300 Ultra 9 which I own and love.
If you haven't already read through this, you should take the time to do it!
FWIW, I also own a Rex Silentium MOD-X can, which can be separated in half and used.
and my 2nd can is a TBAC .300 Ultra 9 which I own and love.
If you haven't already read through this, you should take the time to do it!
FWIW, I also own a Rex Silentium MOD-X can, which can be separated in half and used.
Last edited:
As you can see, you will get a variety of recommendations/preferences. Consider your budget and intended purpose, such as target vs. hunting. This leads to the following considerations: the weight and length of the suppressor.
I wanted to support small businesses and made-in-Montana products, so I went with Eliteiron (https://eliteiron.com/) and Rex Silentium (https://rexsilentium.com/). The Rex Silentium is model MG10 for my.338 Thor. The other two are from Eliteiron: the 30 Bravo SD and Bravo 1. The Bravo SD is on my.30 Lara, but I have used it on my.300 WM, .300 WSM, .270 AI, .264 WM, .257 WBY, and 6.5 CM. The Bravo 1 is on my AR-10 (.308 Win). Good luck!
Good morning Coach P.
I'm a silencer central fan because you can break them down and clean them. A lot of the silencer out there are welded and you are not able to do this. Some will say this is not a big deal until it get so dirty that you will have a stiff bolt lift which I experienced at a long range shooting school during a shooting challenge where I had to shoot 10 targets in 2 minutes, after the 5th shot I was fighting the bolt. It was the schools (Thunder Beast suppressor) that I was using and it cost me to loose the challenge. They have everything you need from 22 rim fire to your 338. I have a 22 Rim fire on order as we speak, but I have 2 Banish 30's and 1- 223 on a AR that I like.
Pro's & Cons with the Banish 30's. Pro's you have the option to make it a 7" suppressor for hunting or 9" for maximum sound suppressing at the range. Con's you have to be diligent in breaking it apart after using it because the thread can be extremely hard to get apart. JMO
I'm a silencer central fan because you can break them down and clean them. A lot of the silencer out there are welded and you are not able to do this. Some will say this is not a big deal until it get so dirty that you will have a stiff bolt lift which I experienced at a long range shooting school during a shooting challenge where I had to shoot 10 targets in 2 minutes, after the 5th shot I was fighting the bolt. It was the schools (Thunder Beast suppressor) that I was using and it cost me to loose the challenge. They have everything you need from 22 rim fire to your 338. I have a 22 Rim fire on order as we speak, but I have 2 Banish 30's and 1- 223 on a AR that I like.
Pro's & Cons with the Banish 30's. Pro's you have the option to make it a 7" suppressor for hunting or 9" for maximum sound suppressing at the range. Con's you have to be diligent in breaking it apart after using it because the thread can be extremely hard to get apart. JMO
Last edited:
jja600
Well-Known Member
TBAC 100%. I have the ultra 7 and Dominus. Great cans.
06 SB
Active Member
- Joined
- Mar 3, 2009
- Messages
- 35
There have been some pretty bad reviews of SC lately but plenty of reports of good experiences like yourself too.
Stiff bolt lift from a dirty suppressor?
SDPlinker
Well-Known Member
Over pressuring!
lancetkenyon
Well-Known Member
^ This. Done.
TXWinBrown
Well-Known Member
TBAC 338 Ultra.
It creates back pressure just like to hot of a load. Sounds crazy but I experience it first hand. I was at Wolf precision shooting school with Jamie Dodson in Pennsylvania and he told me that's what happens if the suppressor gets to dirty, 20 years of experience. Who am I to argue with an expect.
Stugots
Well-Known Member
Buy once cry once! 
DDB TX
Well-Known Member
- Joined
- Feb 10, 2013
- Messages
- 100
Pew Science conducts very scientific testing of suppressors, with decibel readings taken at two locations, by the shooter's ear and off to the side, where, say, a guide would be for the shot. Here is a link to their methodology and rankings: https://pewscience.com/rankings
A score of 50 or higher means you can shoot a day at the range without causing hearing damage; 40 to 50 means you can lave "limited practice" without causing damage.
Click on the "overall composite suppression rating" column to get the results sorted by overall combined results.
The CGS Group Hyperion gets the highest supersonic rifle cartridge rating, a 6.5 Creedmoor scoring at 58.2; second highest subsonic 300 BLK scored at 72.3, and 2nd highest supersonic .308 at 52.3.
The best supersonic .308 was the CAT JL/A1 at 53.8.
The Thunder Beast Ultra 9 tested a supersonic .308 at 46.1.
They have not tested a .338 yet.
Click on the column Manufacturer to see the ratings by maker.
A score of 50 or higher means you can shoot a day at the range without causing hearing damage; 40 to 50 means you can lave "limited practice" without causing damage.
Click on the "overall composite suppression rating" column to get the results sorted by overall combined results.
The CGS Group Hyperion gets the highest supersonic rifle cartridge rating, a 6.5 Creedmoor scoring at 58.2; second highest subsonic 300 BLK scored at 72.3, and 2nd highest supersonic .308 at 52.3.
The best supersonic .308 was the CAT JL/A1 at 53.8.
The Thunder Beast Ultra 9 tested a supersonic .308 at 46.1.
They have not tested a .338 yet.
Click on the column Manufacturer to see the ratings by maker.
