Looking for 270WSM powder recommendations

[Jspeed]

I've been running a max load of MagPro and 140 gr Accubonds at 3140…it's a laser out of my 26" barrel…and magpro is easy to find and not as expensive as some of the others

 

[Coyote Shadow Tracker]

H-4350 with 130AB = 1/2" moa

 

[westcoasthunter]

Retumbo is my favorite powder for 140gr bullets and up, I ran the 140 Accubonds at 3350 fps, Berger were a little slower with the same load

How many grains of Retumbo did you use for the accubonds? I love Retumbo for my loads with 165 matrix ..

 

[Cabinet Matt]

RE-26 is awesome in mine. Berger 140's and Nosler AB 150's both shoot great

What primers?

 

[01Foreman400]

Hybrid 100V and Barnes 110 gr. TTSX

 

[Hudge76]

I never could get my 270 WSM to cooperate with 129 LRX's and RL26. Groups were horrible, but yes velocities and SD were good.

Well I switched from RL26 to RL23 and kept everything. Else the same and got good results.

 

[Frank in the Laurels]

..just like every other short mag..the "mother's milk " for them all..H-4350

 

[Lenny Foffa]

Guys, I do not mean to Hijack this thread, but I forgot how to start a new thread, and I really need a bit of help. This weekend, at a Gun show, I purchased a bag of 50 Rem. Once Fired Brass, in 30-06. The seller, who sells tons of brass, and several bags that were prepped by him. Resized and deprimed; Flash hole reamed, ;wet tumbled , primer pockets perfectly clean. I was just now separating the cases by weight when I noticed his very uniform flash holes appeared to be ever so slightly larger than the raggedy Flash Holes in my new, unfired 30-06 Rem Cases. I have no means of accurately measuring the dia. of the two holes. Could be 1/1000 th difference , or maybe less. His cases have Flash Holes are perfectly round. Should I decrease my 30-06 Loads?? Is it unsafe to use that same load if the Flash Hole is slightly larger?? Any advice is really appreciated!! Thanks Lenny