Hammer 181 Hunters leaving an oblong hole in the target

[Shane Lindsey]

Maybe if you had two cows standing right next to each other with two tags

 

[lancetkenyon]

Hammer customer service, and their bullets, are amazing. I have switched all my copper loads over to Hammers for those two reasons.

Steve not only puts out a great product, but is willing to talk to his customers personally. That says a lot.

 

[RockyMtnMT]

@CENTURY Did you run out of case capacity or hit pressure?

 

[lancetkenyon]

The 22" 6.5SLR w. 124 HH is about max @ 44.0gr H4350 @ 2935fps. Just starting to crunch.

The 26" 6.5SS w. 131 HH I am still testing. But even with a new barrel with only 40 rounds down it is still pushing them @ 3210fps so far.

 

[CENTURY]

I hit pressure with 114 gr. reloder 25 @3648 fps.

 

[RockyMtnMT]

I hit pressure with 114 gr. reloder 25 @3648 fps.

You might look at rl33 or N570 if you can find some.

 

[Shane Lindsey]

You might look at rl33 or N570 if you can find some.

Steve, will that slow of a powder will work well with the 152 in the RUM?

I went with RE22 as I thought the slower stuff wouldn't get enough burn to pressure it up.

 

[Nowoolies]

@CENTURY

I'll get a box of the 152g Hammer Hunters out tomorrow. Be sure and fill us in on how they do. That is going to be a laser beam for sure!

Sir would you ship to Western Australia please !!!!
Cheers
Paul

 

[adk hunter]

Maybe with trying different powders I could get a little more velocity.

...DO YOU HEAR YOURSELF?? LOL

Awesome thread... I think you might need three cows side by side.
I'm doing the same thing with a .280 AI and 131 HH. Lasers

 

[RockyMtnMT]

Sir would you ship to Western Australia please !!!!
Cheers
Paul

As soon as we get our new lathe up and running we are planning to get set up with reloader international for sales out of the country. Once that lathe is going We will be able to meet the demand increase.

 

[Shane Lindsey]

As soon as we get our new lathe up and running we are planning to get set up with reloader international for sales out of the country. Once that lathe is going We will be able to meet the demand increase.

Sometimes it sucks to be good

 

[Nowoolies]

As soon as we get our new lathe up and running we are planning to get set up with reloader international for sales out of the country. Once that lathe is going We will be able to meet the demand increase.

Is the lathe ready now huh huh huh !!!!!!

 

[Gregg C]

I 've been waiting till my current barrel gets toasted , as I 've been shooting 300 grain slugs, (338 cal ) and Hammers need a faster twist than 1:10 in that weight class. I'm addicted to speed, tho, and you guys are getting me all worked up!! Think I may try the lighter Hammers, 230 gr or so, maybe I can get some impressive velocity ,too, like you guys!

 

[Gord0]

Steve should do free sample packs of each caliber per household. It's be like crack. Get someone hooked for life