cmor_15
Well-Known Member
- Joined
- Jul 6, 2011
- Messages
- 57
To satisfy my curiosity. What can someone expect from the 284win with say the 145 lrx in the short action?
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
7mm short action chamberings?
- Thread starter cmor_15
- Start date
Help Support Long Range Hunting Forum
Sorry but I can't answer that because I don't run a short action 284 Win.
I have a couple on long actions and another barrel being cut for another long action.
The 145 LRX would have to go down deep in the case to fit in the short magazine which will take up powder space.
My thought is you will gain some but very little over a 7mm-08 with that bullet.
I have a couple on long actions and another barrel being cut for another long action.
The 145 LRX would have to go down deep in the case to fit in the short magazine which will take up powder space.
My thought is you will gain some but very little over a 7mm-08 with that bullet.
7mm08 with Lapua brass, 150 scenar or ELDX, would be my choice.
I agree with Kimber7man.
Good 140 and 150 grain bullets will do very well in the 7mm-08
Justice1327
Well-Known Member
7-08 SAW…factory ADG brass…30d shoulder…SRP… can fire factory 7-08 rounds…flawless feeds…2700-2800fps w/150-160gr
I have about a dozen versions of 708. While I really like my 708 AI, the 708SAW is a top choice for hunting.
I have about a dozen versions of 708. While I really like my 708 AI, the 708SAW is a top choice for hunting.
Yep. Got a few and love 'em!
xsn10s
Well-Known Member
- Joined
- Mar 7, 2016
- Messages
- 7,683
I'm leaning towards building a 7-08 in my JC Higgins Mauser, I'll concentrate on 180 gr class bullets. but if you're going to stay within 160 class then maybe this article might help you. https://www.6mmbr.com/gunweek095.html
Great article on SA 284 Win!
That may be a route for the OP to venture into.
I really love that 284 Win.
xsn10s
Well-Known Member
- Joined
- Mar 7, 2016
- Messages
- 7,683
I've been torturing myself over choosing the cartridges the OP has. But since I have a 98 Mauser with a bad chamber 7-08 is a cheap/ easy option. 1-8" to 1-9" twist will allow me to use 180 ELDM's seated out. For ME a 1-8.5" twist might be the best option. Less powder to burn and a 7-08 gives me the option to use SRP brass too. But for the OP, or me for that matter a SA 284 would work well too with the possibility of 160 gr class going better than 2900 fps. And one could single feed 180 gr class bullets too. The torture continues lol.
You have gotten excellent advice/recommendations, but you need to narrow down your goal, i.e., 160 class bullet for an all-around deer rifle in .28 cal from a short action; what's your max range, timber or open country hunting, etc.?So I have the action which is a 243 right now and leaning towards not having to buy a magnum bolt since I have a 7wsm already. Goals for this project are basically putting together an all around deer rifle. Quick deer drive type shots as well as get down and send one when the situation warrants it. I already have 7-08 brass so there is that part of the equation but to me that is not the deciding factor. Yet..
One question I haven't found a clear cut answer to yet is the real world velocities from the 708 vs 708 ai in longer barrels.
Sometimes, we tend to overcomplicate things unnecessarily.
xsn10s
Well-Known Member
- Joined
- Mar 7, 2016
- Messages
- 7,683
I have limited funds so I have to make the best of it with what I have. Such is life.
As it should be, and this takes discipline.I have limited funds so I have to make the best of it with what I have. Such is life.
