6.5 PRC 135 Berger Loads? H1000, N560, N565?

[CMP70306]

Instagram is not a reliable place to "store" anything, I learned.

Do you have anywhere you publish that data? I checked your site and the forum but only found the data from 9 months ago.

 

[orkan]

Do you have anywhere you publish that data? I checked your site and the forum but only found the data from 9 months ago.

If I'd stop being busy for 2 seconds, I could put a 6.5 PRC up on the cartridge guide. lol

 

[orkan]

There... got something up.

6.5 PRC :: Primal Rights, Inc

-----------
Follow on Instagram
Subscribe on YouTube
Amazon Affiliate

 

[Andrew Massi]

Thank you guys! I'll definitely watch for it to come in stock!

H4831sc is basically the same burn rate as N560, maybe a touch faster but not by much. In the primal rights data it's grain for grain within a couple fps of each other
It was in stock at hodgdon this morning for about 5 mins. Some should be hitting all the big outlets in the next couple days.

 

[Huntnful]

H4831sc is basically the same burn rate as N560, maybe a touch faster but not by much. In the primal rights data it's grain for grain within a couple fps of each other
It was in stock at hodgdon this morning for about 5 mins. Some should be hitting all the big outlets in the next couple days.

Maybe I'll just roll with my 560 then. Because that's what I'll be using with the 124 Hammers anyways. About 57gr. N560 with a 210M was 3230fps in my last 20" PRC.

 

[Andrew Massi]

Same load with a 125 cutting edge lazer is 3250 out of a 22"

 

[Huntnful]

Same load with a 125 cutting edge lazer is 3250 out of a 22"

Perfect!