30 sherman magnum

[elkaholic]

Rich, Is the chamber length on the 30 sm the same as the 300 prc ? I can't find a trim length anywhere. Thanks

chamber is 2.585"

 

[Deleted member 109523]

chamber is 2.585"

oops!! I was getting some weird groups today. that's why. Thanks

 

[elkaholic]

30 SM dies back in stock

 

[PowerstrokeOBX]

How about brass? My 30 SM has been taking forever but hopefully done soon.

anyone shot 198 flatlines out of one yet?

 

[elkaholic]

How about brass? My 30 SM has been taking forever but hopefully done soon.

anyone shot 198 flatlines out of one yet?

PRC brass is working pretty well but Ill have head stamped ADG by February. Not sure on the flatlines?

 

[PowerstrokeOBX]

PRC brass is working pretty well but Ill have head stamped ADG by February. Not sure on the flatlines?

Awesome; I'll just pick up a hundred or so to break in the barrel then order some ADG.

 

[elkaholic]

Awesome; I'll just pick up a hundred or so to break in the barrel then order some ADG.

I have 100 new in bag ill ship for $70 if you want them?

 

[Mudder500]

I'm looking into a 300 prc but was told to do this route instead. Any advantages over PRC? Also do I need a standard long action or a magnum like long action for a Remmy?? Trying to gather parts up

 

[elkaholic]

I'm looking into a 300 prc but was told to do this route instead. Any advantages over PRC? Also do I need a standard long action or a magnum like long action for a Remmy?? Trying to gather parts up

Remmy LA works well mag bolt face.
Advantges are higher velocity with a better case design, less case stretching and bolt thrust. Also shoots PRC factory ammo very accurately in a pinch or to fire form. ADG head stamped brass in February.
Mine easily runs the 230 Berger at 3050'.

 

[Mudder500]

Remmy LA works well mag bolt face.
Advantges are higher velocity with a better case design, less case stretching and bolt thrust. Also shoots PRC factory ammo very accurately in a pinch or to fire form. ADG head stamped brass in February.
Mine easily runs the 230 Berger at 3050'.

So a standard LA Remmy 300 Win mag would work without changing the bolt head? Looking pick up a used action if possible

 

[elkaholic]

So a standard LA Remmy 300 Win mag would work without changing the bolt head? Looking pick up a used action if possible

Yes, that should work fine!

 

[Mudder500]

Yes, that should work fine!

I can get Remmy 270 or 30-06 ADL from my local supplier for 270 or so after tax and shipping. Will either of those bolt heads work?

 

[SwampDog13]

I can get Remmy 270 or 30-06 ADL from my local supplier for 270 or so after tax and shipping. Will either of those bolt heads work?

Neither of those have a magnum bolt face. They would either have to be machined opened up or replaced.

 

[Mudder500]

Neither of those have a magnum bolt face. They would either have to be machined opened up or replaced.

So I would basically need a 300 Rum to start then the right mags. I can get action or gun right now. There in stock