marksman1941
Well-Known Member
- Joined
- May 20, 2013
- Messages
- 1,025
But that's the point, this is field conditions. Not a bench. If you can shoot an f class rig from a bench on a calm day (or with wind flags every 8 inches) it's not so hard. A hunting weight rifle off a bipod at variable distances, elevations, multiple wind channels with nothing but environment to read by is a different game altogether. This is purely about the shooter being able to read the wind correctly every single time, get correct range every single time, and shoot under 1 moa the whole time.Doubtful any top shooters in the nation would even consider a 6"x8" target to be any kind of challenge at 600 yards(In ideal conditions). Most could set their gun in the front and rear rest, adjust the cross hairs to the target and not even look thru the scope or shoulder the rifle for half those hits on a target that size. This I'm pretty sure of. When many of those same top shooters are shooting <.5 minute groups at 1000 yards with ease, it's not a matter of theory vs practice. Shooting conditions(environmental)are what will cause a failure to most if not all shooters. A 6" steel plate is smaller than a gallon jug and it's pretty easy to ring from 600 yards regularly in calm conditions. I'm far from a one of the " Top Shooters" in the nation but this size steel plate sits out at 600 yards on my range and it's been replaced a couple times from abuse. I will say that many shooters groups don't really constitute a group unless it's 10 shots rather than 3 or 5. Lots of rifles are .25" guns until the group is a 10 shot group. Suddenly the .25" group moves up a bit to the .75-1.0" group.