I'm about to pull the trigger on a fierce carbon rival in one of the 7s but can't decide which one to get. I was wanting a 22" barrel but I've been seeing slow velocities with the 22" so maybe I'll get a 24" instead. What's everyone's experience with velocity in 22" barrels and opinions on 7prc vs 7mag. The fierce comes with 8.5 twist in 7 mag so I'd still be able to shoot heavier bullets
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
7prc or 7mag
- Thread starter Elk Crazy
- Start date
Help Support Long Range Hunting Forum
PRC-better brass
Pondering this myself…. Have a Fierce 7 RM and thinking about adding another barrel for my Blaser R8. Would have to go aftermarket for a 7 PRC.
Have a 6.5 and 300 PRC and really like them. For most hunters, little significant difference between the two 7's. Same thing for 300 WM and PRC. For long range shooting there is.
All that said, if you are a hand loader I would go 7 PRC if you don't already have a 7 RM. If you already have dies, brass etc I'd stick with the 7 RM.
Have a 6.5 and 300 PRC and really like them. For most hunters, little significant difference between the two 7's. Same thing for 300 WM and PRC. For long range shooting there is.
All that said, if you are a hand loader I would go 7 PRC if you don't already have a 7 RM. If you already have dies, brass etc I'd stick with the 7 RM.
- Joined
- Feb 18, 2007
- Messages
- 1,054
Doesn't the same companies make brass for both cartridges? Hornady, ADG, and Peterson? I'm sure lapua is on the horizon for the 7prc, but who knows when that will happen.
I would worry more about a fierce rifle than which 7magnum. Get a Seekins instead. Have seen issues with the ones I worked with and have heard other reviews of the same. I went 7PRC over the WM for 284 cal. Epsicailly with a shorter barrel. Still shoot the 300 WMs in the belted though.
Plinker147
Well-Known Member
- Joined
- Feb 7, 2015
- Messages
- 1,198
7 PRC is a better mouse trap go with that
slikmrc
Well-Known Member
Magazine length of 3.4, 7PRC. Mag length of 3.6 or more take your pic.
Frank in the Laurels
Well-Known Member
- Joined
- Jul 15, 2007
- Messages
- 2,026
...only one has stood the test of TIME !! Personally I'm not hedging any bets on anything that hasn't been around for many moons, too dam old to be monkeying around finding components for 100fps... 7mm Rem Mag, truly an old warhorse !
MagnumManiac
Well-Known Member
I wouldn't touch a Fierce rifle…I do not like POT LUCK.
As to which one, I wouldn't touch a 7PRC either.
7STW is king in 7mm.
Cheers.
As to which one, I wouldn't touch a 7PRC either.
7STW is king in 7mm.
Cheers.
Frank in the Laurels
Well-Known Member
- Joined
- Jul 15, 2007
- Messages
- 2,026
NO DOUBT ABOUT IT, AS LONG AS YOUR STASH OF 8MM BRASS HOLDS OUT....LOL
You are correct.
MagnumManiac
Well-Known Member
