Justice1327
Well-Known Member
That is impressive. I am hoping my 6.5 Mega does that.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Sherman Wildcat Reloading Data is Here!!!
- Thread starter Idaho Trecker
- Start date
Help Support Long Range Hunting Forum
You can add 75fps I would assume, run the low node and enjoy stability.
It's fast enough that I'm going to try 153.5's and hopefully stick to them
It's fast enough that I'm going to try 153.5's and hopefully stick to them
Last edited:
H1000 with 153, not the 144, went a tad over 3200 and I stopped before it got excessive.
Ran a pressure/ velocity ladder today with the 25SS.
Topped at 3216 with 58grs R23 beneath a 135LRHT.
Going to run it at 3103fps for a while with 56.0grs
ES-3, .5" accuracy at 100 in a gale.
N565 and H1000 come next.
Topped at 3216 with 58grs R23 beneath a 135LRHT.
Going to run it at 3103fps for a while with 56.0grs
ES-3, .5" accuracy at 100 in a gale.
N565 and H1000 come next.
Maverick021485
Member
Getting into the last stages of my 375 Yukon build. I'll be running the 300gr. Chinchanga ST seated with the boat tail just below the shoulder.
Does anyone have any experience loading this round or some suitable rough starting data? There's only 3 loads lists on the Sherman website.
Thanks
Does anyone have any experience loading this round or some suitable rough starting data? There's only 3 loads lists on the Sherman website.
Thanks
Maverick021485
Member
Bghunter338
Well-Known Member
Right!!
Maverick021485
Member
What would you like to know?
Maverick021485
Member
17.5" and 18.5" is what Rich designed the cartridge with. The few loads he listed were 17½" barrels.
I'll be running a 20" Brux #5 suppressed with a Thunder Beast Magnus 7"
Last edited:
wilkup
Well-Known Member
Gonna be one helluva critter getter!
What velocity are you expecting/hoping for with your barrel length and load?
