Varmiter71
Well-Known Member
- Joined
- Oct 14, 2015
- Messages
- 165
Hornady has released load data as well.
22 Creedmoor Powders
- Thread starter jfjohn77
- Start date
Help Support Long Range Hunting Forum
quigley257
Well-Known Member
Lots of good data here...
Don't forget about using 22-250AI data that you find. Especially for lighter bullets. The only real difference is Ackley 40deg shoulder and 30deg on the Creed. They're so close I've used 22Creemoor brass in my last 22-250ai. I've had great luck with 3031 and 8208(40gr bullets in 1:14t barrel).
Attachments
.300 Dakota
Well-Known Member
MRP was by far the best for me. Won't find that on a site anywhere for data. But good luck finding MRP. StaBall 6.5 gave great speed and pretty good accuracy.
RegionRat
Well-Known Member
For the time being, Hornady puts their latest stuff on the web site before it goes to the next revision.
https://www.hornady.com/support/load-data/
https://www.hornady.com/support/load-data/
Tikka t3x 22-250 1 in 8 reamed to 22 Creedmoor, 22 inch barrel YHM Turbo T2 Suppressor, Alpha SRP Brass CCI450
Yes, I would like to know that also.
I think Hornadys data is questionable from all powders I tested I find some of it hard to believe. I was hoping for speeds like that from 6.5 Staball but pressured out. I didn't try RL26 cause only got 2lbs didn't want to waste it. Staball Match was very close to Varget but hit pressure. Best speed I seen was H4350 an Varget. I didn't have Vhitavouri at the time. But from what I've seen of it in my PRC 560,565 an 570 would probably do well probably even 555. I wanted around 3500 so I'm settled on this load. I tried everything with LRP also an averaged about 20-30 fps more. Hit pressure with this loading so just stayed with the 450s they've done me well an I have 4,000 of them lol
Grand seemed pretty spicy in my PRC so would probably work it's super fine powder but dang it's cheap....why you bring that up now I'm curious lol
I bring it up because Hodgdons data show it bing the fastest powder without compressed loads with the lowest chamber pressure. Yes pixie dust for the 22 creed with heavies. I have not tried it yet that is why I ask. What do you mean by spicy in your PRC? Did you hit preasures unexpectedly with little warning? or That is the other cartridge I would like to try it for. Thanks
Grand is not listed among the Powder in Gordan's. The Powder selections have not been updated to include it, and I don't know how to go about it. So, I can't run any numbers on it. From what I have read it should work.
Grand is about same burn rate as Ramshot Magnum I think it just has the stuff in it for less copper fouling. My 7 prc has been finicky to say the least an I didn't get close to book max before I hit pressure with Grand. Happened with a few powders. Ended up settling with H1000 in the PRC. I've had the clicker issue even with what should be the fix I still can't run hot at all. Bolt lift will be fine, primers look fine. Case doesn't want to eject. Didn't realize till after that was common problem with 7 an 300.
