Help Support Long Range Hunting Forum
Well, we'll see. Maybe you'll be right
That might make a great happy medium between the WSM and the cases becoming overbore. That would put it at the bottom end of smaller 300WM case capacities in a shorter more efficient case. On another note I have never personally got a 300WM to run 215 Bergers 3k without trashing brass. Win, ADG, Nosler, Norma, Black hills, Bertram, yes all of them. I am speaking of 26" barrels.Well, we'll see. Maybe you'll be right
But if a wsm holds 83, then the mega will hold 86!
Stay tuned!
Consider it done!
I thought a 300 wsm held 80+ grs?
My winchester 300wsm brass is just shy of 83 grains H20 fired. My Winchester 7wsm brass is 83 grains H20 fired. Keep in mind this is to the neck and the 7 is smaller neck. Also keep in mind Winchester brass sucks and I can not guarantee older lots were not different.
Gotcha. WW always did hold more in most head sizes.
I may have mispoke. I meant to the top of the neck. completely full.
Rich, have you gotten a piece of brass made yet since it's not based on a parent or is it still in the drawn and waiting stage of that? I don't think I'm alone when I say that pictures are always nice
I figured thars what you me
Probably when I get closer and have a chance to do some testing.
What do you get with your 7 max?
185 CEBs are HARD on brass at 3020 from a 26" with RL26. These are bore riders so pressure is far less than would be with a lead core. Can't get enough N570 in to overcome the RL26
