Which 7mm for a Tikka?

Im kinda getting bored with the current stable so I figured I'd change up my Tikka. Just ordered a 22" Proof carbon Sendero light in .284 8 twist to replace the current 6.5 GAP barrel and a mesa precision altitude stock to swap out the greyboe. I'm debating between 7wsm and 7SAUM but I haven't written off 7 rem mag completely yet either. I really like the lighter recoil of the 6.5 gap I have now but am looking for something more in the middle of my 6.5 Creed and 300WM hunting rifles. The Tikka limits me to 3.4" so I'm worried about the rem mag running out of mag length and I feel a long throated SAUM or WSM should really shine here. I already have metal long action WSM mags so that's not an issue. Mainly I'm concerned about quality brass availability. There are only a few makes for either it seems, though I find more for the WSM than the SAUM. What are your thoughts on which 7mm for a Tikka? Thanks, Sam.
Absolutely love my 2 7mm wsm's. Brass has been a problem but midway had win brass in stock as of a week ago. I bought 1000 rds so i dont have to worry. I shoot 168 berger hunting/target and have had great success. Never had a failure from the bullet.
 
I would take the Rem mag of the list personally. I would do a 7 MAX from Sherman Wildcats to get the most out of the Tikka, the 7 WSM is all but dead, the 7 SAUM throated is nice but you can get more with the MAX in the same brass.
Certainly NOT dead! Only a brass shoryage which i hope is over. Out performs saum all day long!
 
You could throat a 284 win. Peterson brass seems to be quality stuff.

Hard to make a .284 work with a magnum bolt.
I keep hearing about how the WSM is dead but my local sporting goods stores all have 4-5 kinda of factory ammo in stock and no SAUM ammo. That said the brass availability seems to be an off and on issue. Right now now I can find Jamison, Hornady and Winchester brass in stock though. I think I'd like the smaller case of the SAUM better, but the only brass I can find in stock for it is Nosler or Norma which are essentially the same thing. And I have yet to be impressed with that. I seem to get 4-5 firings tops out of Norma brass. Adg is making SAUM brass now it seems but it's out of stock and there is a waiting list for it. I have a month or so till my barrel shows up so I'll keep pondering.
*Edited for grammar
 
Hard to make a .284 work with a magnum bolt.
I keep hearing about how the WSM is dead but my local sporting goods stores all have 4-5 kinda of factory ammo in stock and no SAUM ammo. That said the brass availability seems to be an off and on issue. Right now now I can find Jamison, Hornady and Winchester brass in stock though. I think I'd like the smaller case of the SAUM better, but the only brass I can find in stock for it is Nosler or Norma which are essentially the same thing. And I have yet to be impressed with that. I seem to get 4-5 firings tops out of Norma brass. Adg is making SAUM brass now it seems but it's out of stock and there is a waiting list for it. I have a month or so till my barrel shows up so I'll keep pondering.
*Edited for grammar

ahh, looks like I mixed up the tikka threads.
 
Nope, DEAD. If the 7 WSM out performs the SAUM why is it dead when the SAUM had taken of!
Simply bc Winchester was sued by the inventor of the Cartridge for Royalties and they lost, so they dropped it and continued with its children they developed. The 7WSM will equal velocities of the 7MM Weatherby in equal barrel lengths. I have both and they are within 15fps of each other. It is no slouch, it is a great cartridge. Well behaved and very accurate. Winchester should have paid the money and kept it. Killed off due to greed, not performance. Shame.
 
I don't see how a 7wsm offering more velocity in stock form compared to a SAUM would be considered dead?

Throat them both and the WSM still outruns the SAUM.

(Coming from a 7 SAUM owner)
 
Nope, DEAD. If the 7 WSM out performs the SAUM why is it dead when the SAUM had taken of!
The wsm will always outperform tbe saum, period, if you are unawere of that then do some research. The saum is not a bad cartridge, the wsm just can do everything it can do and more. The saums were limited by the rem short action, they will not handle the wsms. Dont shoot the messenger, just because you dont like the truth of the message.
 
Simply bc Winchester was sued by the inventor of the Cartridge for Royalties and they lost, so they dropped it and continued with its children they developed. The 7WSM will equal velocities of the 7MM Weatherby in equal barrel lengths. I have both and they are within 15fps of each other. It is no slouch, it is a great cartridge. Well behaved and very accurate. Winchester should have paid the money and kept it. Killed off due to greed, not performance. Shame.
I agree!
 
Yes. My SAUM w/defiance deviant running 175's just a hair under 3.00 in the SAUM netting 2850 FPS max pressure w/reloader 23. (22 inch barrel)

hunting partner runs his 7wsm w/180 Berger's under a mild load of 4831SC right at 2950 FPS out of his Montana 1999 action. (24 inch barrel) I cannot member overall length offhand but definitely longer then sammi.

I'm stomping on the pedal for 2850 in the SAUM and he's @ idle w/his load out of the wsm. I'm sure with reloader 23 or 26 he could really bump up the velocity.

not exactly apples to apples with my shorter barrel but enough to gather a pretty good idea that the WSM runs away from the SAUM.

just our first hand knowledge here - not gospel. Everyone has their own experiences- just voicing what we have came across.

either cartridge is a winner in my opinion!
 
Im kinda getting bored with the current stable so I figured I'd change up my Tikka. Just ordered a 22" Proof carbon Sendero light in .284 8 twist to replace the current 6.5 GAP barrel and a mesa precision altitude stock to swap out the greyboe. I'm debating between 7wsm and 7SAUM but I haven't written off 7 rem mag completely yet either. I really like the lighter recoil of the 6.5 gap I have now but am looking for something more in the middle of my 6.5 Creed and 300WM hunting rifles. The Tikka limits me to 3.4" so I'm worried about the rem mag running out of mag length and I feel a long throated SAUM or WSM should really shine here. I already have metal long action WSM mags so that's not an issue. Mainly I'm concerned about quality brass availability. There are only a few makes for either it seems, though I find more for the WSM than the SAUM. What are your thoughts on which 7mm for a Tikka? Thanks, Sam.
Probably can't go wrong with any of them, just making sure your reamer for the saum or wsm has more freebore than a saami reamer if you are gonna shoot 175gr & up. Usually Most all saami reamers on a 7mm rm will work fine with 175& up cause the 7mm rem mag was originally designed back in 1962 for heavies, not the same longer low drag heavies we use today but never the less, 180s work fine. You will have ample room to seat long. Buy some nosler or adg 7mm rem mag brass, retumbo, 180s, 8.44 to 8.75 twist barrel and it won't be long until you are smiling. Ive got two of them. A factory unbraked sendero 9lbs and a Savage with a 26" proof cf & muzzle brake. 6lb 11oz. Both like 180 eldms @2860fps. Brass lasts forever. The savage kicks like my unbraked 7mm-08 x-bolt and has less muzzle jump. Very fun to shoot.
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top