turkeyguide
Well-Known Member
Rock Chucker Supreme, RCBS Jr, Lee 4 hole turret
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
What press are you using?
- Thread starter 338weatherby
- Start date
Help Support Long Range Hunting Forum
Varmint Hunter
Well-Known Member
I'm still trying to wear out the RCBS Rockchucker press that I bought 42 years ago. I can honestly say that I think I'll wear out first. 
turkeyguide
Well-Known Member
I've had my RCBS Jr. since I was about 16....................................hate to admit it but I'm 72 now. OUCH!
wbm
Well-Known Member
Lyman Spartan
wonderman4
Well-Known Member
turkeyguide: you got your's a couple of years before I got mine. I am still using that Jr. today.
I bought my first RockChunker in the early 70s and use it on my 460 Wby and a bunch of others.
The Jr. press is perfect on cartridges from the 22 Hornet up to 375 H&H.
My inventory has 3 Jr presses and 2 Rock Chucker and all date to before 1975.
To the OP: you can get some respectable used presses on ebay. I bought one there and the rest came from individuals and the LGS.
I bought my first RockChunker in the early 70s and use it on my 460 Wby and a bunch of others.
The Jr. press is perfect on cartridges from the 22 Hornet up to 375 H&H.
My inventory has 3 Jr presses and 2 Rock Chucker and all date to before 1975.
To the OP: you can get some respectable used presses on ebay. I bought one there and the rest came from individuals and the LGS.
docdempster65
Active Member
https://leeprecision.com/classic-lee-loader/....all you really need if you have a bolt action
pr single shot in a caliber made for ?Lee Loader.
Also Lee Hand Press isportable and surpirsingly powerful; will full length re-sized just about any cartidge!
leeprecision.com
pr single shot in a caliber made for ?Lee Loader.
Also Lee Hand Press isportable and surpirsingly powerful; will full length re-sized just about any cartidge!
Breech Lock Hand Presses
The new Lee Breech Lock Hand Press. The world@s most popular hand press, more convenient than ever, now includes the Breech Lock Quick-Change Die Feature, so you can instantly change dies with just a twist of the wrist. One Breech Lock Quick Change Bushing included.
Good luck on wearing it out don't think you will be able to get it done.I'm still trying to wear out the RCBS Rockchucker press that I bought 42 years ago. I can honestly say that I think I'll wear out first.
sbruni
Well-Known Member
Atthough I haven't used it in a bit I also have a Sinclair Arbor press and Wilson dies... it's handy to be able to set up to reload at the range
Mike Matteson
Well-Known Member
I started with and C&H press at age14, Move on to Rock Chucker and purchases 2 more for my sons. 3 Ponsness-Warren pressure for 28, 20, & 12 gauge. I am going to get their new press that load all from 410 to 10 gauge from 2 1/2" to 3 1/2" with changeable dies. A Dillon 1050 press with several sizing dies for pistol ammo, and 5.56. Now we are back to shortages again. When I was in Vietnam 50+ yrs ago, we didn't have shortage for components to reload that, I was aware of. I am sure we went through more ammo during that time, than what we just came through. I know that Obama was buying huge amount of ammo that wasn't needed during his term in office. Far more than any police force could ever use. They put away million of rounds into storage. Now we are back at it again (NO SUPPLIES).
freddiej
Well-Known Member
I will make this short as possible. I use the Dillon 550 B, actually two of them. for standard ammo for pistol and training ammo I leave the shell plate moveable. when I am doing precision ammo I lock down the shell place and it is basically a 4 station single stage press. It's rock solid and it has never failed to keep my varminter, predator, hunting and target rounds from being as good as if I was using my single stage (Hornady Iron Press). Some days I wonder why I even bought that Hornady press.
Jrainey
Active Member
Dillon 550 for everything
Get a Forster. Whatever it takes.
for reference, started with a RCBS partner then upgraded to a Rock Chucker. When space was unlimited this was great. Replace the RC with a Forster and kept the partner on the bench solely for depriming. Now have significantly less space and use the Forster only. No reduction in efficiency.
for reference, started with a RCBS partner then upgraded to a Rock Chucker. When space was unlimited this was great. Replace the RC with a Forster and kept the partner on the bench solely for depriming. Now have significantly less space and use the Forster only. No reduction in efficiency.
Mowgli Terry
Well-Known Member
My RC press was made in 1977 about the time I started reloading. Still have the original RC. There is another RC set up on a heavy metal stand. I am another bullet tipper. The Co-AX for my purposes is under powered and over advertised. There is some heavy duty case forming going on here. There are two 550's here for the handguns. Tool heads have been set up for 223 and 30-06. The Bonanza Co-Ax with four sets of jaws is up forsale. A majority of my gear has came second handed,
