Thoughts on this prediction?

[wvbearhunter]

I recently acquired nearly 1000 of the 195 grain Sierra Tipped Matchkings and plan to work on some 300 PRC loads with them.

I found data for 190 grain and 200 grain loads using H1000 which is the powder I plan to use.

190gr - 76.9 to 83.1
200gr - 75.2 to 80.9

I am thinking of starting at 76 and working up from there. Thoughts?

I do not intend to work up to barrel melting speeds. I am hoping to find a node on the lower end somewhere between 2850-3000fps.

 

[Ol' Red]

I would say you're on the right track.

 

[jpd676]

That looks safe to me; I've had to do similar things. Remember, each chamber is different and you may get pressure way before max in one and not in another, even if they are the same manufacturer. Book values are guidelines not absolutes.

 

[wvbearhunter]

That looks safe to me; I've had to do similar things. Remember, each chamber is different and you may get pressure way before max in one and not in another, even if they are the same manufacturer. Book values are guidelines not absolutes.

Amen to that.