So, Muzzle Brake attachment….

[nksmfamjp]

I just bought a new Tikka with a factory brake. I want to use the factory brake.

What is the proper way to install it? Loctite? Other? What torque? How to torque?

 

[Laelkhunter]

I use Loctite 8008 copper based anti-seize lubricant on the threads when attaching the brake to the barrel. I make sure it is tight, but I don't torque it to any specifications.

 

[nksmfamjp]

Why anti-seize? SS on SS? to prevent galling?

 

[FEENIX]

Why anti-seize? SS on SS? to prevent galling?

For protection from galling, corrosion, and seizing due to weathering or chemicals. I use anti-seize on all threads mated with similar or dissimilar material. I use the highest temp rating, but that's just me.

 

[Laelkhunter]

Why anti-seize? SS on SS? to prevent galling?

Yes, my brake is carbon steel and my barrel is stainless. Don't want to booger up the threads on the barrel.

 

[cabelasken]

although any copper based anti seize will work, I've used the loctite material which is good for 2400 degrees

 

[HSmithTX]

I use blue loc-tite and have never had one move in use, and I have never had one gall or corrode in the threads.

 

[Laelkhunter]

although any copper based anti seize will work, I've used the loctite material which is good for 2400 degrees

I never paid any attention to the temp range on mine, now that I am reading it the label says "Protects Metal Parts from Corrosion and Seizure to 1800* F (980*C)." I'm hoping that's sufficient. If I buy another container later on, I will look for the higher temp rating, thanks for the heads-up.