Should I have it threaded?

[MKP777]

Does the gunsmith have to remove the barrel from the action to thread it?

 

[LoneTraveler]

If the GS has a lathe with big enough head stock hole, The barrel will be long enough for action clear lathe head stock.
Center on both ends of head stock. May be able to leave sight base and trigger on action.

As for the trigger, Remington triggers are known for having rough sears. Smooth sear and polish should get you to the trigger you want.

 

[06 SB]

Does the gunsmith have to remove the barrel from the action to thread it?

Some do and some do not. I do not know if it is the size of the equipment or the skill of the machinist.

 

[KTP]

Sent 3 to be done at Silencer Central. Seamless process and rifles shoot as good as they did before making the trip….just quieter now !

 

[FireFlyFishing]

Does the gunsmith have to remove the barrel from the action to thread it?

Depends on their equipment.

 

[MKP777]

If the GS has a lathe with big enough head stock hole, The barrel will be long enough for action clear lathe head stock.
Center on both ends of head stock. May be able to leave sight base and trigger on action.

As for the trigger, Remington triggers are known for having rough sears. Smooth sear and polish should get you to the trigger you want.

I like how wide it is. I put a timney trigger in a gun and its trigger was good and crisp but very narrow. I have a trigger tech trigger in my 6.5CM and it too is very narrow.
The wide triggers are hard to find anymore.

 

[Mram10us]

Does the gunsmith have to remove the barrel from the action to thread it?

nope. and he can thread without touching your crown.

 

[MKP777]

I'm finding a gunsmith to get this done, I just gotta decide which thread pitch. My B&T suppressor is 5/8X24 I think.
Might just go with that one. But I have a YHM Turbo K on my AR-15 and I could just pull that off and use that one. But not sure what that muzzle device is threaded at.

 

[wilehunting]

Silencer central job done on a Winchester extreme weather

 

[morgaj1]

Silencer central job done on a Winchester extreme weather

Looks great. What was the turnaround time?

 

[wilehunting]

About three weeks.