MKP777
Well-Known Member
Does the gunsmith have to remove the barrel from the action to thread it?
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Should I have it threaded?
- Thread starter MKP777
- Start date
Help Support Long Range Hunting Forum
LoneTraveler
Well-Known Member
If the GS has a lathe with big enough head stock hole, The barrel will be long enough for action clear lathe head stock.
Center on both ends of head stock. May be able to leave sight base and trigger on action.
As for the trigger, Remington triggers are known for having rough sears. Smooth sear and polish should get you to the trigger you want.
Center on both ends of head stock. May be able to leave sight base and trigger on action.
As for the trigger, Remington triggers are known for having rough sears. Smooth sear and polish should get you to the trigger you want.
06 SB
Active Member
- Joined
- Mar 3, 2009
- Messages
- 40
Some do and some do not. I do not know if it is the size of the equipment or the skill of the machinist.
Sent 3 to be done at Silencer Central. Seamless process and rifles shoot as good as they did before making the trip….just quieter now !
