Rabbitslayer78
Well-Known Member
Well it's about time. Can't beat the STW.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
28n, 7rum, 7stw decisions (7rm falls far behind)
- Thread starter ARlife4me
- Start date
Help Support Long Range Hunting Forum
Wowzas!!!!
Rabbitslayer78
Well-Known Member
7 Stw is by far the better choice if you can seat the longer BC bullets. I've been running the Berger 180's for years and haven't had to change mag wells yet. Just gotta find the sweet spot. If ADG is gonna run STW brass it's a no brainer. There is once fired brass out there if you look. It's a great club of long range fanatics that still run 7 Stw.
I hope this happens
Wild Monkey
Well-Known Member
- Joined
- Oct 16, 2017
- Messages
- 437
7mm-27 Nosler? 3.66" OAL shooting 190's. 3.56" OAL shooting 175's.
Last edited:
Rabbitslayer78
Well-Known Member
Update from ADG brass as of yesterday. If we Keep contacting them every few months and follow them on Instagram. Any ways here is the email.
"We will be pursuing 7STW this year. Unfortunately, as of this email we do not have an availability timeline. Please follow us on Instagram adg_brass and / or check back in a couple of months for an update."
Good luck fellow 7STW brothers.
"We will be pursuing 7STW this year. Unfortunately, as of this email we do not have an availability timeline. Please follow us on Instagram adg_brass and / or check back in a couple of months for an update."
Good luck fellow 7STW brothers.
warrbuk
Well-Known Member
- Joined
- Feb 18, 2005
- Messages
- 341
For those of us that are older we were enamored by Layne Simpson and the development of the 7STW. I had a 280 Imp 40' so I went down the 300Imp (300 Jarrett) road for many years. Magazine lengths made working with full length cartridges more difficult.
If i had a 3.90 or 4.0 capable action and I would be all over a 8 twist 7 STW with 195's seated properly with the shoulder.
3.8" long action and a 28N seat up with the throat makes sense.
The Unknown Munitions DBM is 4.0 and works good
If i had a 3.90 or 4.0 capable action and I would be all over a 8 twist 7 STW with 195's seated properly with the shoulder.
3.8" long action and a 28N seat up with the throat makes sense.
The Unknown Munitions DBM is 4.0 and works good
Yep Unknown Munitions dbm is a nice way to go. 3.950 inside box length. Had to do a little milling to this Lone Peak Fuzion but it worked great. In the early 90's I really wanted a 7 stw. If ADG really comes through I might have to build one.
