• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Sherman Wildcat Reloading Data is Here!!!

I find a tips pressure faster then the bergers 230/230 and 245-250 and the 300's not sure why but i do get 50-75 fps out of bergers.
I've found that also. I've not been able to get bergers in Canada for a long time now. I've got a couple left but the a-tips are working for me
 
I have ELD-X in 150gr and 175gr. I'm guessing though slower, I'd getter better groups with the 175 ELD-X
I have RL-23, 25, 26, & H-1000. Looking for Pronghorn/Whitetail load and I believe RL-23 is most temp stable of these.

Not sure if others have tested primers? I have WLRM, GM210M & GM 215M. I planned to test for velocities unless others hear have tested.
 
Last edited:
OK I must be an idiot. Where is the link to the load data? I don't see it on page 1
IMG_0006.png
 
Well, I'm always in development! This load is pretty close to done.

28 Sherman Magnum: ADG Brass; IMR7828SSC 75.0gr; Hammer Hunter 169gr @ 3.626" OAL; 3257fps with SD of 13.8 (n=24)

This load shot 5 groups of 5 into a composite 25 shot 0.75" group. Worst group was 0.708". Tuner not tuned yet!

Just wanted to share in case you are looking for a 28SM load. I'm sure many folks are chuckling about me posting an Sd of 13.8, but remember that is for 25 shots….not 3 or 5. Same with the group size. There are a lot of 3 shot 0.1" groups in a 0.75" 25 shot composite!
 
Well, I'm always in development! This load is pretty close to done.

28 Sherman Magnum: ADG Brass; IMR7828SSC 75.0gr; Hammer Hunter 169gr @ 3.626" OAL; 3257fps with SD of 13.8 (n=24)

This load shot 5 groups of 5 into a composite 25 shot 0.75" group. Worst group was 0.708". Tuner not tuned yet!

Just wanted to share in case you are looking for a 28SM load. I'm sure many folks are chuckling about me posting an Sd of 13.8, but remember that is for 25 shots….not 3 or 5. Same with the group size. There are a lot of 3 shot 0.1" groups in a 0.75" 25 shot composite!
if you would, submit this to idahotrecker for compiling...thx
 
Top