eda9049237
Member
Do you need to be a member to see this data? I am interested in getting a rifle calibered in Sherman 6.5 SS
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Sherman Wildcat Reloading Data is Here!!!
- Thread starter Idaho Trecker
- Start date
Help Support Long Range Hunting Forum
You can get the data on the Sherman wildcat cartridges website under the "more" tab
Idaho Trecker
Well-Known Member
New thread that will get the continued updates as data is provided to me.
www.longrangehunting.com
SHERMAN CARTRIDGE LOAD DATA
Sherman Wildcat cartridges are experimental and have no saami loading standard. These files were compiled from many different loaders using unique equipment. They were deemed safe in their individual rifles but should be approached with caution by starting 10% lower and working up to your...
old 7mm
New Member
Matthew488
Member
Hello everyone and Happy Thanksgiving 
Does anyone have any load info you can share for 7SST?
My barrel (27in) is nearly finished for 7 SST and to starting working up some loads. Going to be starting with 180gr ELD-Ms.
Does anyone have any load info you can share for 7SST?
My barrel (27in) is nearly finished for 7 SST and to starting working up some loads. Going to be starting with 180gr ELD-Ms.
elkaholic
Well-Known Member
Use about 1.5 grs less than the SS dataHello everyone and Happy Thanksgiving
Does anyone have any load info you can share for 7SST?
My barrel (27in) is nearly finished for 7 SST and to starting working up some loads. Going to be starting with 180gr ELD-Ms.
try 59 grs RL26
56 grs RL23
58 grs 4831
61 grs H1000
Reloading data for 7mm Sherman SS
7 Max, 24" proof barrel 8.4 twist, 150 grain BD-2, COAL 2.965", 58.8 grains H43450, Velocity 2945 fps, 23K jump, ADG brass.New thread that will get the continued updates as data is provided to me.
SHERMAN CARTRIDGE LOAD DATA
Sherman Wildcat cartridges are experimental and have no saami loading standard. These files were compiled from many different loaders using unique equipment. They were deemed safe in their individual rifles but should be approached with caution by starting 10% lower and working up to your...
I also developed a load with 62.8 grains H4831SC, velocity 2972, same COAL and jump but this was not as accurate in my gun.
Gstew1930
Well-Known Member
I think you can get quite a bit higher with a slower powder. I got to 3k safely in my 7ss & N560
so how do I look at all the Sherman 30 Sherman Mag reload data? Is it just by reading thru all the posts or what? I cant seem to find anything other than a coupleon Ricks webste. ThanksMy thanks to all of you who contributed and a SPECIAL thanks to Ryan for his hard work and great job of putting this all together. I just could never get the time and this is a great help
where is all this load data for 30 Sherman Magnum.I cant seem to find anything.Immissing it some how.Thank you.My thanks to all of you who contributed and a SPECIAL thanks to Ryan for his hard work and great job of putting this all together. I just could never get the time and this is a great help
