Seeking empirical evidence to support or refute powder/seating-depth nodes

[Alibiiv]

I posted the two references for the express purpose of adding to the community. After recently stumbling across them, they have radically changed my thoughts on how I approach reloading. I thought the community may benefit from the information they proffer.

I am looking to have an honest discussion about that information and hear the opinions of others, many with infinitely more experience and knowledge than I, specifically on the information presented. If you reviewed either of them, I would welcome your insight, you obviously have been doing this a lot longer than I. What I don't understand is the need for personal attacks on my character and motives, you could have just as easily said you were not interested in any new information on reloading and moved on.

Well.......I am going to answer your last question first. You ask about the need for personal attacks. When I first started reading your thread I said to myself, "Boy is this guy going to get beat up!!!" And....you pretty much did. It was more about how you framed your question, than the question itself. Your question came across as if it was coming from a "smart ***", know it all. With the large vocabulary and the framing of your question that is how it came across. I am not saying that you did anything wrong, I am just telling you how I interpreted your original post. You are dealing a large group of dedicated and knowledgeable shooters on here who are generous, empathetic and kind. They will go out of their way to help "anyone" out and share any and all information they have with anyone who asks. From your post you came across as asking a question and then challenging the information that you received from them. I am certain that if you included, "I posted the two references for the express purpose of adding to the community. After recently stumbling across them, they have radically changed my thoughts on how I approach reloading. I thought the community may benefit from the information they proffer.", the responses/replies would have been a lot different.

Now for you first question. I believe that there are too many "extraneous variables" to achieve what you are asking for, empirical data. "Empirical data is information acquired by scientists through experimentation and observation, and it is essential to the scientific process. Use of the scientific method involves making an observation, developing an idea, testing the idea, getting results, and making a conclusion." With this said, I believe that there is enough "quantified data" to develop a chi-square postulate. Defined "A chi-square test is a statistical test used to compare observed results with expected results. And........the purpose of this test is to determine if a difference between observed data and expected data is due to chance, or if it is due to a relationship between the variables you are studying."

There certainly is enough information, testing and research, based upon the numerous members and volumes of information here on this forum, to develop your own empirical data postulate. Good luck finding the information that you are looking for.

 

[ShtrRdy]

I've been using this approach with positive results:

 

[FireFlyFishing]

I am 45 now and I started reloading on my dad's bench when I was about twelve. What I can tell you, I have learned more in the last couple of years than all the previous years combined. Partially, because I have been nerding out on the subject of late. By and large, things have changed…for the good IMO.

When I was twelve, there was no internet. There were gun magazines and fellow shooters at the range passing info. Trial and error was THE way. I have learned a metric ton from gun forums as it brings the shooting community together…right at your fingertips…literally. Of course, you have to know how to navigate the good from the bad.

Reloading for an old, sloppy chambering factory rifle from yesteryear is far different than a modern factory rifle with tighter tolerances utilizing modern reloading components. Custom actions and rifles are a thing for anyone willing to drop the coin for one…you can make one on your kitchen counter nowadays. Plus, there's way more accurate and precise reloading equipment available. My gas guns…previously thought to be inaccurate spray guns…now out shoot many of my older rifles…easily.

With all that being said, some of the anecdotal procedures of days past do work…and work well. Tinkering with the older rifles seems to be where these techniques come into play. When you listen folks say this or that is a waste of time and is fudlore…listen closely to the equipment they're using/testing. It's typically next generation rifles, components, reloading equipment, etc. Of course you can skip some older techniques and arrive with a good solution for that rifle, quickly.

For those of us that have older equipment and still enjoy shooting dated rifles still need to pull out these complicated loading techniques to get things shooting to desired levels of accuracy and precision. Think about it this way…a well rounded mechanic can wrench on older cars AND plug in the diagnostic equipment for the modern vehicles they produce today. It's easier to plug in a machine that's tells you what's wrong with the vehicle…just like it's way easier loading for new rifles.

That's my opinion anyway…

 

[VenatusDominus]

Well.......I am going to answer your last question first. You ask about the need for personal attacks. When I first started reading your thread I said to myself, "Boy is this guy going to get beat up!!!" And....you pretty much did. It was more about how you framed your question, than the question itself. Your question came across as if it was coming from a "smart ***", know it all. With the large vocabulary and the framing of your question that is how it came across. I am not saying that you did anything wrong, I am just telling you how I interpreted your original post. You are dealing a large group of dedicated and knowledgeable shooters on here who are generous, empathetic and kind. They will go out of their way to help "anyone" out and share any and all information they have with anyone who asks. From your post you came across as asking a question and then challenging the information that you received from them. I am certain that if you included, "I posted the two references for the express purpose of adding to the community. After recently stumbling across them, they have radically changed my thoughts on how I approach reloading. I thought the community may benefit from the information they proffer.", the responses/replies would have been a lot different.

Now for you first question. I believe that there are too many "extraneous variables" to achieve what you are asking for, empirical data. "Empirical data is information acquired by scientists through experimentation and observation, and it is essential to the scientific process. Use of the scientific method involves making an observation, developing an idea, testing the idea, getting results, and making a conclusion." With this said, I believe that there is enough "quantified data" to develop a chi-square postulate. Defined "A chi-square test is a statistical test used to compare observed results with expected results. And........the purpose of this test is to determine if a difference between observed data and expected data is due to chance, or if it is due to a relationship between the variables you are studying."

There certainly is enough information, testing and research, based upon the numerous members and volumes of information here on this forum, to develop your own empirical data postulate. Good luck finding the information that you are looking for.

Thank you for the input, and per your recommendations have edited my original post.

 

[VenatusDominus]

I am 45 now and I started reloading on my dad's bench when I was about twelve. What I can tell you, I have learned more in the last couple of years than all the previous years combined. Partially, because I have been nerding out on the subject of late. By and large, things have changed…for the good IMO.

When I was twelve, there was no internet. There were gun magazines and fellow shooters at the range passing info. Trial and error was THE way. I have learned a metric ton from gun forums as it brings the shooting community together…right at your fingertips…literally. Of course, you have to know how to navigate the good from the bad.

Reloading for an old, sloppy chambering factory rifle from yesteryear is far different than a modern factory rifle with tighter tolerances utilizing modern reloading components. Custom actions and rifles are a thing for anyone willing to drop the coin for one…you can make one on your kitchen counter nowadays. Plus, there's way more accurate and precise reloading equipment available. My gas guns…previously thought to be inaccurate spray guns…now out shoot many of my older rifles…easily.

With all that being said, some of the anecdotal procedures of days past do work…and work well. Tinkering with the older rifles seems to be where these techniques come into play. When you listen folks say this or that is a waste of time and is fudlore…listen closely to the equipment they're using/testing. It's typically next generation rifles, components, reloading equipment, etc. Of course you can skip some older techniques and arrive with a good solution for that rifle, quickly.

For those of us that have older equipment and still enjoy shooting dated rifles still need to pull out these complicated loading techniques to get things shooting to desired levels of accuracy and precision. Think about it this way…a well rounded mechanic can wrench on older cars AND plug in the diagnostic equipment for the modern vehicles they produce today. It's easier to plug in a machine that's tells you what's wrong with the vehicle…just like it's way easier loading for new rifles.

That's my opinion anyway…

I absolutely agree that the many of the anecdotal methods work, they have for me at any rate. I am just trying to understand why they work and am open to change if there is new information presented.

 

[Koda_]

You are correct, the article only tests powder charge nodes, the video by Keith Glasscock addresses seating depth nodes. I follow Erik's channel and, until recently, based my reloading method, with regards to seating depth, on this very video. After watching Keith's video (a former F-class shooter) I am rethinking my methods.

Long winded videos are never good in most forum discussions due to time. I cant watch it all right now. What is the seating depth takeaway from the Glasscocks video?

One of the problems with these studies is while well thought out they cant possibly cover all variables. Keiths rifle was totally custom built, the average handloader has a factory deer rifle with average reloading components.

 

[VenatusDominus]

Long winded videos are never good in most forum discussions due to time. I cant watch it all right now. What is the seating depth takeaway from the Glasscocks video?

One of the problems with these studies is while well thought out they cant possibly cover all variables. Keiths rifle was totally custom built, the average handloader has a factory deer rifle with average reloading components.

In the video, his seating depth ladder demonstrated a best 3 shot group (load #1) of 0.183" and a worst three shot group (load #3) of 0.374". After increasing his sample size to 33, the group size for the 0.183" load measured 0.7969" and for the 0.374" load measured 0.6840". He analyzed smaller 5 shot groups from the data and found that the #1 load most often produced the smaller 5 groups, but those groups themselves "walked" around the point of aim much more. The #3 load had slightly larger 5 shot groups but were overall better centered about the point of aim, thus accounting for the overall smaller 33 shot group of load #3. He concluded that, while the three shot groups were vastly different, the 33 shot groups were statistically the same and that his changes in seating depth had no meaningful effect on the group size (he also tested a third "mediocre" load from the seating depth ladder which was also statistically the same size as the other two at the larger sample size).

 

[Koda_]

I read that article and it supports the hypothesis that powder and depth nodes are a myth, as their only accurate seating depth was on the lands. I don't think Its findings on seating depth are applicable to hunting as I don't think anyone seats touch the lands. From the article:

"One thing he stressed is that bullets must be precisely seated against the lands. He NEVER fired a single official screamer group when he was "jumping" bullets. All his best groups were always seated into the lands, or at the very least touching the lands. His practice was to seat the bullets so the engraving was half as long as the width of the lands...You can change the powder charge slightly, and it won't really make any difference, but if you change the bullet seating depth (ie. not touching the lands) or the grip on the bullet, you're going to see bad things happen fast."

I read the article and disagree he proved anything except the methods in his rifle worked for him. Again, another totally custom rifle but also some very custom and unpractical handloading methods that most recreational handloaders will never use (eg: pressing a ring into the case neck??? )