Rifle Case Marks Identify

[1of500]

These are 6.5 Creedmoor Casings ran thru a bolt action with small marks on neck which turns into scratch and a ding to the right at the base of scratch. Can this be 1 or more issues here? Any help with what is going on would be greatly appreciated. Thanks

 

[elkaholic]

Looks like something pretty sharp got poked down the chamber but I'm not quite connecting the dent?

 

[CVCOBRA1]

I'd say you have more than one burr in that chamber. Probably could be polished out but I would talk to the barrel maker. Should have been caught on inspection. Who's barrel is it?

 

[1of500]

I use a bore guide and everything I have used is brass.

 

[elkaholic]

I use a bore guide and everything I have used is brass.

Were the marks there the first time you fired it?

 

[1of500]

I'm going to recheck my brass since I have all of it

 

[1of500]

I'd say you have more than one burr in that chamber. Probably could be polished out but I would talk to the barrel maker. Should have been caught on inspection. Who's barrel is it?

Are you asking manufactured this barrel?

 

[1of500]

Were the marks there the first time you fired it?

All the brass I have has the marks. I should been on that

 

[elkaholic]

So the marks were made by whoever chambered it

 

[CVCOBRA1]

Are you asking manufactured this barrel?

Yes. Those chamber burrs should have been seen on inspection.

 

[1of500]

So the marks were made by whoever chambered it

Yes As I think with you two it would be something protruding out to make the dings and scratch. And not someone making dings in the chamber.

 

[elkaholic]

Yes As I think with you two it would be something protruding out to make the dings and scratch. And not someone making dings in the chamber.

It was something that was hard and sharp being pushed forward by the looks of the skip marks on the shoulder.

 

[1of500]

Yes. Those chamber burrs should have been seen on inspection.

I will be getting in touch with them and find out about there customer service on these matters. The photos show it way better than my eyes. I hate to throw names around on the internet when I em the only one with the issue and the madia can make it huge.

 

[CVCOBRA1]

I will be getting in touch with them and find out about there customer service on these matters. The photos show it way better than my eyes. I hate to throw names around on the internet when I em the only one with the issue and the madia can make it huge.

I totally understand that. Kind of where I was going. If it is a "Walmart" barrel you probably wouldn't get much done about it. If it came from a barrel maker send them the pics with your question. Clearly visible in those pics.