59.7 gr works best in my rifle with VLD seated .015 off lands. I don't have stats in front of me but I was just above 2950
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Reloading 280 AI which powders
- Thread starter Sneuses
- Start date
Help Support Long Range Hunting Forum
cabelasken
Well-Known Member
That is screaming fast - I'll have to try that powder!!!
slickyboyboo
Well-Known Member
155 gr and 140 gr Absolute Hammer, RL16 is a magic combo. Right at 3200 fps with the 155 gr, and tiny groups.
Any conventional bullet in the "160-168 gr range, VVN560 is amazing, and especially now since all the N500 series powders are temp stable.
Any conventional bullet in the "160-168 gr range, VVN560 is amazing, and especially now since all the N500 series powders are temp stable.
Yeah it's moving right along. Lots of guys running the 140 AH well over 3300 FPS. Now that my brass is fully formed I'm sure I could drive them faster.
cabelasken
Well-Known Member
I am getting 3390 with a 130 AH with no pressure signs. I will use this load for this season. I will order some 140 AH after my hunt to try out. I'm not sure if there will be much terminal performance difference between the two
nimrod_gn
Well-Known Member
I was able to get about 3400 with the 140 Absolute Hunters in my 280 AI with 24 inch barrel. Sadly the accuracy was not good. My gun just doesn't like the Hammers
Yeah in load development I got very close to 3400 FPS as well. No ejector mark or heavy bolt lift, but primers were flat. Truthfully I haven't had enough time to shoot my gun much. But last time out I did shoot a few half MOA groups. Which is as good as I can shoot. Still need to shoot it out farther to see how it does.I was able to get about 3400 with the 140 Absolute Hunters in my 280 AI with 24 inch barrel. Sadly the accuracy was not good. My gun just doesn't like the Hammers
