Sendero_Man
Well-Known Member
yes, with it strapped on. Wanted to see if there was any impact difference. i was happy !
New GAP Extreme Hunter in 6.5 SAUM
- Thread starter Sendero_Man
- Start date
Help Support Long Range Hunting Forum
Outlaw6.0
Well-Known Member
Gotta love the Magneto Speed, I was just using my V1 with the 6.5WSM, I like it a LOT more than the "normal" style chronos.
What Primer are you using in the SAUM?
t
What Primer are you using in the SAUM?
t
MudRunner2005
Well-Known Member
That's a good lookin rig!10 shot Target with H1000 and 140 Amaxes @ 3140 FPS. Found good seating depth and load.
the Magnetospeed V1 is one slick unit !
Also, might I ask where you got that chrono, and how much they run? I think that would be a handy setup to have, since most of my load development is off a bench at a semi-private range, and it would be a pain to setup a regular chronograph. That's a cool looking setup, I've never seen one before.
Outlaw6.0
Well-Known Member
MudRunner2005
Well-Known Member
Thanks for the info!
That's honestly not as bad as I was anticipating from your post.
I was figuring in the 4-digit range... But I think for $375, I might have to order me one in the next couple weeks.Thanks again!
Sendero_Man
Well-Known Member
Mine is the V1. $275
Nomosendero
Well-Known Member
The whole set up is impressive indeed!! My 264 is not much faster, I know, custom chamber, fast barrel & all that stuff, but still very interesting velocities
Sendero_Man
Well-Known Member
yes, very happy with the 130's and 140's that I have tried.
gonna be hell on critters this fall !!
gonna be hell on critters this fall !!
memyselfni
Active Member
- Joined
- Mar 1, 2007
- Messages
- 38
Looking at building one of these on a T3 here in NZ are you guys able to tell me what reamer i need to order from PTG?
Thanks
Thanks
antitactical
Well-Known Member
Nice rifle and nice vectronix rangefinder beside it.
Copied from one of Georges posts.
Reamer we use has a .296 nk and .081FB print# is 50645 at PTG
I had Dave also make us a reamer with a .298 Neck for (NoTurn application) Print# 54006 Because some guys would not want to mess with turning the runout off. it also has .081 FB
There is a turn and no turn reamer and George has made changes in FB so make sure you get the most recent one. I believe the most recent turned brass reamer is the one that will most likely have brass made for it commercially if that matters to you.
Scot E.
Scot E.
