New 28 nosler.

[Mt.Boy]

I have components I have Berger ,nosler bullets. Have Retumbo ,h1000 and Reloder 33. Fed 215 primers and cci 250. Forster benchrest dies and Nosler Brass

 

[L.Sherm]

Your all set then, if you try to run the Nosler brass very hard at all it the primer pockets will be done in about 3 reloads.

 

[L.Sherm]

When you wanted to know were to get ADG brass my assumption was you didnt have any, guess I was wrong.

 

[Mt.Boy]

Was just saying if I could find some ash brass I would buy some to start load work with.

 

[Longrange338allen]

Have any of you tried Bertram 28 brass ?

Yes very inconsistent in weight/length, hard to get a low SD. I use ADG 1ST followed By Nosler 2nd. I can get 5 reloads w the Nosler then it's trash time.

 

[Trm82]

Soft, primer pockets will open up.

I've never had a problem with nosler brass for the 28 nosler.
I've loaded the hell out of them and get 5-6 loads on them pushing 180 vldh to 3240fps.

 

[L.Sherm]

I've never had a problem with nosler brass for the 28 nosler.
I've loaded the hell out of them and get 5-6 loads on them pushing 180 vldh to 3240fps.

I'm not the only one who's had this problem with Nosler brass so it's not a fluke.

 

[BJH]

I have noticed the same problem with other cartridges using Nosler brass. I tried some in a 7-300 Win and after the 1st firing the primer pocket was done for.
I like the ADG brass for the 28 Nosler as well. It has worked very well so far for me.