-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
New 28 nosler help
- Thread starter 6mm06guy
- Start date
Help Support Long Range Hunting Forum
bsaoneshot
Well-Known Member
No, it isn't the greatest brass. Go with Bertram or ADG spend the extra money. I have the same problem with the nosler brass, too soft. I am getting 4 to 5 reloads with my load. Probably will get more with annealling. When this batch of Nosler brass is done, I will probably got to one of the others, just waiting on reviews.
Backcountry_IDN
Well-Known Member
I wont use nosler because of this. Built a 6.5-284 purchased a box of 140 ab for break in procedure and had this, plus primers blown out
And you know that the Hornady brass "isn't the greatest" how? Have you tried it in 28 Nosler? It's actually pretty decent for the price, it's not Peterson or Starline quality, but works well enough to get 7 firings out of it, before annealing and at $40-$45/100 from Mid South, I'm good. I was looking at the Hornady 28 Nosler last night, but not at $50/20! I'l just try and keep calm and wait til ADG finally puts out a batch?! So until then I'l still use Nosler, because that's pretty much, all we got to work with, for the forseeable future.
D
Deleted member 107796
Guest
I was curious, did you check OAL and the case length after shooting? I was trying to see if they may have oversized its' length, as sometimes happens at factories, causing the overpressure. Just a thought.
I didn't think about oal of the cases, the bullets checked fine, I'll check the shoulders when I get home.
D
Deleted member 107796
Guest
Great. Checking the case length to be sure it isn't long, would be good info.
Shawn Conde
Well-Known Member
What size neck bushings are you guys using
BoatTail
Well-Known Member
Tell me are you cleaning the barrel between rounds? A few years ago I made the mistake I'm not completely drying out the chamber between shots as I was breaking in a rifle. That extra liquid caused increases in pressure and a stiff Bolt lift. Other than that I would ask Christensen Arms. I believe their Chambers are standard SAAMI 28 Nosler Chambers but you might validate.
I called christenson and they told me it was normal for nosler ammo in there guns
greatwhitehntr
Well-Known Member
Did they tell you they use a minimum saami and very tight head space they would not give specs their guns are set up for factory ammo per Christensen. Have had the same problem in 3 28's nosler brass sucks and Hornady isn't to far behind. Oh and yes I have used it. Hornady's ammo isn't to bad, gave good ES mid 30's especially compared to nosler factory ammo
greatwhitehntr
Well-Known Member
Bertram for the price needs a lot of work and not very consistent.
When you see ADG or Peterson brass snatch it up, I do.
When you see ADG or Peterson brass snatch it up, I do.
