• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

My 338 Lapua Magnum by Cloud Peak Gunworks

Group one: 55 Degrees, 28.74 Baro.
1F27B553-D95D-4C82-9DC8-F56C5C9C1B77.jpeg


Group two: 60 Degrees, 28.74
75E1EB23-E4F3-4BA3-A16E-0BAC1EFA49D1.jpeg


565 Yards, No wind, Everything was the same as far as bullets, powder, case, and primers.

9.75 Moa U/.5 Moa L (2842 fps)

Confused why one group was dead nuts center and my second was to the left.
 
You are shooting the NF ATACR so I doubt the scope is shifting POI... are you sure the wind didn't shift very slightly between groups? I know you said no wind, but maybe??
 
My load quest continues. I am to the point where I believe I am splitting hairs. My last rounds were at 2.998. I thought ok .005 +/- either way and see what happens.

500 Yards/8 MOA (2842 fps)/.5 MOA L/28.20 Baro/78 degree/76 RH/Slight head wind. Center square was 2.5"x2.5"
9180F66A-00F2-4CCC-9198-91C199EFB5C6.jpeg


Removed the .5 MOA L.
BE46B89C-7699-4774-973F-E2CA6EDC50EE.jpeg


Constructive Thoughts or Ideas!
Thanks
 
Last edited:
My load quest continues. I am to the point where I believe I am splitting hairs. My last rounds were at 2.998. I thought ok .005 +/- either way and see what happens.

500 Yards/8 MOA (2842 fps)/.5 MOA L/28.20 Baro/78 degree/76 RH/Slight head wind. Center square was 2.5"x2.5"
View attachment 104371

View attachment 104372

Constructive Thoughts or Ideas!
Thanks
I would definitely say when you increased to 3.003" BTO the grouping seemed to improve. What if you used 3.003" BTO as a baseline and go +- .005 from there?
 
My load quest continues. I am to the point where I believe I am splitting hairs. My last rounds were at 2.998. I thought ok .005 +/- either way and see what happens.

500 Yards/8 MOA (2842 fps)/.5 MOA L/28.20 Baro/78 degree/76 RH/Slight head wind. Center square was 2.5"x2.5"
View attachment 104371

View attachment 104372

Constructive Thoughts or Ideas!
Thanks
I would definitely say when you increased to 3.003" BTO the grouping seemed to improve. What if you used 3.003" BTO as a baseline and go +- .005 from there?
 
Thanks, -64 Days to Wyoming.
Awesome! I can't truly hunt until next year. I'm currently in Aviation Maintenance School and I have a little over 6 months left. All my time is being devoted to studying and getting ready for tests so I can be certified to work on aircraft.
 
I detect hesitancy to be close to the lands, your call. You know your rifle. I don't remember your 91 grain load of H1000 being in pressure or close to it. Maybe try 5 @ 3.005" for a .003" jump, and 5 @ 3.001" for a .007" jump? One of those should tell you something, even if it's re shoot 3.003"
 
DACC45EC-6719-4422-BEB4-4036A3454525.jpeg


600 Yards/10.75 MOA (2842 fps)/No Wind Hold/28.41 Baro/55 degree/66 RH. 4" circle.

This was a reshoot from my last outing. Going with 3.003"/.005 off. For my trip. Four shot group measures under 3" and has the least amount of vertical.
 
Top