SheepSeeker
Well-Known Member
IMHE (3 X and A bolts) they are fine rifles. IMHO 300 WSM is a silly cartridge as are all the shorties, catering to the short action myth. 300 WinMag has been proven in 1000s of rifles and is the obvious 1st choice.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Looking for help with Browning Hells Canyon Speed 300wsm
- Thread starter dan25
- Start date
Help Support Long Range Hunting Forum
Both of my X-bolt 300 WSM rifles had so so accuracy with a variety of loads. The best thing I did was to have both pillar and skim bedded and then to install and tune a replacement trigger spring. The White Gold Medallion will put three 200gr Eld-X rounds into an inch at 200yds. Just one of the rifles that I will never sell, even though I almost did just that.
The Satin Hunter X-bolt would put the same 3 rounds into an nice little cloverleaf at 100yds, killed deer out to 400yds with that rifle. Before that, I would not even consider a shot much past 150yds.
The potential is in the rifle, it just needs to be worked out, so don't just give up.
The Satin Hunter X-bolt would put the same 3 rounds into an nice little cloverleaf at 100yds, killed deer out to 400yds with that rifle. Before that, I would not even consider a shot much past 150yds.
The potential is in the rifle, it just needs to be worked out, so don't just give up.
TexasSportsman
Well-Known Member
The X-Bolt family of rifles have proven to be a home run for Browning. It isn't the best selling rifle but it has more than proven its worth. I own two, the FLD new and the Stalker used. Both are very accurate...
X-Bolt Full Line Dealer
X-Bolt Composite Stalker
X-Bolt Full Line Dealer
X-Bolt Composite Stalker
TexasSportsman
Well-Known Member
It isn't easy to find ammo for WSM or WSSM and when you do it usually isn't the caliber or bullet weight you need.
Laguna Freak
Well-Known Member
0.75 moa is pretty darn good for any mass produced rifle shooting mass produced ammo. Nice "work through the problem".
