How to make Savage 110 Action less sloppy

[PopNFresh]

Really

 

[coastalcustoms]

Hey, have you tried polishing the bolt and the raceway? Sometimes just a bit of smoothing can help reduce friction. Also, make sure everything is properly lubricated. If that doesn't work, you might want to check the alignment and make sure the bolt isn't binding anywhere.

I haven't tried polishing yet. But I will now. Thanks

 

[coastalcustoms]

Does the round hop over the bolt face and bind, requiring a slight pull back and then feed?

No. When the bolt is in the most rear position and then pushed forward, it binds and is not a smooth throw to force the round into the chamber

 

[coastalcustoms]

Does the round hop over the bolt face and bind, requiring a slight pull back and then feed?

No

 

[coastalcustoms]

Yea, need more info.
Savage is a great action, self alignment.

The alignment is the issue when the bolt is in the rear position and trying to push another round into the chamber. It gets hung up on the sides of the raceway

 

[Roughrice]

The alignment is the issue when the bolt is in the rear position and trying to push another round into the chamber. It gets hung up on the sides of the raceway

That is exactly what I experienced and was explaining in post #8.
The ones I experienced were the Ultralight models.

 

[coastalcustoms]

That is exactly what I experienced and was explaining in post #8.
The ones I experienced were the Ultralight models.

Mine is a 110 BA