Desire to build a 300 RUM
- Thread starter Algie
- Start date
Help Support Long Range Hunting Forum
Shane Lindsey
Well-Known Member
- Joined
- Jul 13, 2010
- Messages
- 3,677
DO IT!!!
Are you looking to handload or are you stictly going to shoot factory ammo?
If money is no option, there are good ones out there. Just make sure you get one that is set up to load long and can accomodate the components you want on the rifle (BDL, DBM, etc).
The Rem factory action is not cut to load long to take advantage of the case capacity. If you want to do that, you can either single feed (not optimal for a hunting rig) or you can have the action modified by cutting the mag well to fit an extended mag box, shorten the bolt stop, and potentially open up the ejection port. I did this on mine and now I can load 3.85" vice the 3.6" factory offerings.
RUM is fun...
Where in VA are you? I am in Fxburg.
Are you looking to handload or are you stictly going to shoot factory ammo?
If money is no option, there are good ones out there. Just make sure you get one that is set up to load long and can accomodate the components you want on the rifle (BDL, DBM, etc).
The Rem factory action is not cut to load long to take advantage of the case capacity. If you want to do that, you can either single feed (not optimal for a hunting rig) or you can have the action modified by cutting the mag well to fit an extended mag box, shorten the bolt stop, and potentially open up the ejection port. I did this on mine and now I can load 3.85" vice the 3.6" factory offerings.
RUM is fun...
Where in VA are you? I am in Fxburg.
If I was going to build a 300 rum, then I would use an impact action. They are a Remington 700 clone action. That action has massive support and lots of gunsmiths have already have their specs. You will be able to call up the smith and have them send you a barrel. Spin it on yourself and go shoot!
I wouldn't do a rem action, Expecially on a rum. I have mostly defiance but there's several other nice ones to choose from.
cohunt
Well-Known Member
Lefty7mmstw
Well-Known Member
good cartridge choice and a m700 action will work. I've got m700 300 rum rifles in the safe right now...
Mines built on a Stiller action with a carbon fiber barrel. I chose to stick with the shorter magazine as I knew I'd be shooting lighter grain higher velocity bullets. In my case, 203 grn Hammer HHT's. I have a 338 Edge that I shoot the big stuff out of. There's lots of possibilities for the RUM.
Jnm300ultra
Well-Known Member
- Joined
- Jan 31, 2015
- Messages
- 328
If you call defiance they can make any action load a 4" round. Moa rifles was one of the few that made an action that would be able to use a 4" 300 RUM, now that Defiance and MOA rifles are both owned by Bob Beck. Also make sure to get a bottom metal that will work for that long on a round. I have one of Moa rifle in a 300 RUM and it's an awesome caliber with a 230 Berger.
Good luck with your build,
Jason
Good luck with your build,
Jason
