Bushing Dies for larger calibers...

[Earnhardt]

Does any one make bushing type dies for larger calibers? Such as the .358, .375, or .416?

Or are you guys machining out factory type bushings to the size you need?

ie. opening up a bushing used in a .338 cal load, so it could be used to neck size a .375 caliber round.

Who does that machining nowadays?

Thanks

 

[fseaman.js]

 

[Earnhardt]

One more time…can someone who has done this with bushings answer my question?

No bots, ABCs, or Trolls please.

 

[Tucker65]

I believe Whidden has full length bushing dies for the 375/408 Cheytac

 

[Huckleberry75]

WHidden will make custom dies too. Might be an option for you. They made my 22cm dies many years ago before it even became a blip on the interwebs.

 

[R. Cram]

I had problems with FL dies making a 6.5x284 cases very nonconcentrick and a 30-284 die doing the same so I bought a 284 FL bushing for the neck die and made my own bushings for 6.5 and 30 cal. the ones I made are not hard but still will probably last long and any machine shop should be able to make them if you have a die base. cutting out an existing die to fit a bushing probable won't work because the ones I tryed were too hard to be cut with standard carbide cutters