ormandj
Well-Known Member
Yep, same day for PV I suspect. Checking daily isn't going to work anywhere online, everything sells out in minutes.
I use n560 in mineI'm interested in trying this in my 6.5 prc with some 124 grain hammers. Anyone think it might be too fast?
holy crunch! you are putting in a bunch more than me and i am getting crunch setting to 280 COL. my coronagraph says 2830 with 41.5. what i am saying is i question the accuracy of your scaleI use it in a 7-08 with a 139 grain Barnes LRX. Good consistent 5/8 inch 5 shot groups at 2840 fps. 22 in barrel. using 44.8 grains in Starline brass with a federal lg rifle primer.
2.8 oal. Went all the way up to 46.5 gains and 3050 fps. That load showed mild ejector swipes and flattened primers. Still under 1 in groups. These are compressed loads as this is a bulky powder.
This is good to know as I have a 7-08 22" and rl15.5.I use it in a 7-08 with a 139 grain Barnes LRX. Good consistent 5/8 inch 5 shot groups at 2840 fps. 22 in barrel. using 44.8 grains in Starline brass with a federal lg rifle primer.
2.8 oal. Went all the way up to 46.5 gains and 3050 fps. That load showed mild ejector swipes and flattened primers. Still under 1 in groups. These are compressed loads as this is a bulky powder.
Possibly is to fast, but volume might take it away kind of like the 100 series powders? With 84k of primers to burn I might give it a try?I'm interested in trying this in my 6.5 prc with some 124 grain hammers. Anyone think it might be too fast?
I've seen it in stock recently. I think Bruno'sHere it is March 18,2024 and have not seen Reloader 15.5 since I got 2 pounds when it came out.I started the post September 15,2021 and still have not seen it again.I am afraid to work up a load for it as I will find a sweet load and run out of powder!
Crazy reloading world.