7mm PRC

[TX Punisher]

I found some at mile high.

 

[dave_halsey]

I got a few boxes ordered

 

[RandH]

Anyone loading the 195 Berger?

How about using retumbo? Any success with heavies?

Thanks

I'm using the 195 Berger EOL and I'm getting good results with velocity (3025fps) and precision using RL50 with WLRM primers and a 26 inch barrel . I'm tried Retumbo and H1000 but wasn't getting the velocity I was looking for but the precision was good with both.

 

[Korhil78]

I'm using the 195 Berger EOL and I'm getting good results with velocity (3025fps) and precision using RL50 with WLRM primers and a 26 inch barrel . I'm tried Retumbo and H1000 but wasn't getting the velocity I was looking for but the precision was good with both.

Yowzers

 

[Phil Rizzo]

Thats where I was with a 175EH and R26, at 24" and like a 3070 max if I recall.
Trying a 26" soon.
are you using a drop tube with the R50? I don't have experience with it.

 

[Prieto9000]

I'm using H-1000 and Retumbo for most my loads, and H4831SC has given me very good results too.
As for now my favorite hunting load is
71gr H-1000 behind a 154 Hornady InterBond @3200fps

 

[Palix-Dog]

Anyone using Magpro? I see it listed in the Hornady load data.

 

[Sneuses]

I'm using Winchester Staball HD - not Ramshot. I wish I could get RL-26.

Reloder 26 is out there and over the last two weeks I've stumb upon 6 pounds of it at $60 per. Even found four sleeves of Fed 215m primers. Unicorn horns everywhere

 

[TX Punisher]

Just did some initial testing on the new 22" barrel. H1000 gave nice accuracy with the 175 eldx. Will have to up the charge to get above 2900fps.

4831sc gave some nice speed with decent accuracy. Will up the charge next trip and post data then.
may also try Retumbo with the 195 berger.

 

[Batt2413]

Can't wait to start some testing but my plan is too shot the Berger 180 hybrids which I had great success with in my 7mag. I picked up some ADG brass and going to test N565 and Retumbo

 

[Countrykang8]

I would like some information on what power and primers people are using for 7mm PRC are you using mag primers

I'm using large rifle primers, not match. Just finished this load today.

ADG Brass
H1000 68.2 gr
COL 3.300"
Fed GM210M
2957 fps, SD 1

 

[Sneuses]

I'm using large rifle primers, not match. Just finished this load today.

ADG Brass
H1000 68.2 gr
COL 3.300"
Fed GM210M
2957 fps, SD 1

What was the bullets weight?

 

[Korhil78]

What was the bullets weight?

Says it in the picture title. 175 Gr Berger.

 

[Sneuses]

Says it in the picture title. 175 Gr Berger.

Did you get a decent group?