6 PRC help

[Tidus56]

Hey everyone,

Time to get an additional barrel made for my son's hunting rig. I am going to do a 6-6.5PRC/6PRC as his second barrel on his gun. I am struggling to find anyone who offers this chambering from my normal barrel makers. Who has anyone used to chamber their 6PRC? I plan to shoot 109 hybrids and 110 A tips. I have just at 3 inches in the magazine on this setup.

Anyone have a good barrel maker they used for this cartridge?

 

[dfanonymous]

Anyone who smiths that has a reamer for a 6 PRC…

My go to guy is Chad a LRI

 

[wasskeet]

I had Travis @ TS Customs chamber a Benchmark in 6 PRC for me. He does first class work and gets things done quickly.

 

[Tidus56]

Anyone who smiths that has a reamer for a 6 PRC…

My go to guy is Chad a LRI

I haven't found too many with the 6 PRC reamer was actually the issue. What is LRI? So I can reach out to Chad.

 

[Huntnful]

@Barehandlineman11 has my reamer for lapua brass and 108/109 ELDM's. It has a .200 freebore and put a 108 ELDM at 2.955" .020 off the lands and a 109 ELDM at 2.980" .020 off the lands. I believe the 109 ELDM is just a 110 a tip with a plastic tip.

109 Hybrid may sit too far out FYI

 

[Austin_Michael]

I haven't found too many with the 6 PRC reamer was actually the issue. What is LRI? So I can reach out to Chad.

LRI = LongRifles, Inc

 

[Justice1327]

Travis at TS customs, standard free bore runs 90 grain/87 grain/80 grain bullets awesome. but ask for the .180 FB for the longer bullets

 

[cajun]

Hey everyone,

Time to get an additional barrel made for my son's hunting rig. I am going to do a 6-6.5PRC/6PRC as his second barrel on his gun. I am struggling to find anyone who offers this chambering from my normal barrel makers. Who has anyone used to chamber their 6PRC? I plan to shoot 109 hybrids and 110 A tips. I have just at 3 inches in the magazine on this setup.

Anyone have a good barrel maker they used for this cartridge?

The problem is it is not a saami round. Still a wildcat I believe. So the barrel makers that do prefits will not have them. You will need a gunsmith that does custom work and has a reamer or you will need to buy one and a barrel blank and bring it to your gunsmith.

 

[blksno]

Hey everyone,

Time to get an additional barrel made for my son's hunting rig. I am going to do a 6-6.5PRC/6PRC as his second barrel on his gun. I am struggling to find anyone who offers this chambering from my normal barrel makers. Who has anyone used to chamber their 6PRC? I plan to shoot 109 hybrids and 110 A tips. I have just at 3 inches in the magazine on this setup.

Anyone have a good barrel maker they used for this cartridge?

99% sure TSCustoms offers a 6PRC. 99% sure he and a ton of his buddies shoot them for predator hunting.

 

[dfanonymous]

I haven't found too many with the 6 PRC reamer was actually the issue. What is LRI? So I can reach out to Chad.

Contact us

LongRifles Inc. 3570 Mayer Ave, Suite BSturgis, SD 57785 Phone: 605.490.2561Fax: 605.206.7820 [email protected] Due to the increased volume of interest, please include all contact information as it better allows us to generate accurate estimates. Custom estimates are drafted using...

www.longriflesinc.com

Yes, he should still have a reamer. Call, or email and ask for a quote.