6 PRC help

[Tidus56]

Hey everyone,

Time to get an additional barrel made for my son's hunting rig. I am going to do a 6-6.5PRC/6PRC as his second barrel on his gun. I am struggling to find anyone who offers this chambering from my normal barrel makers. Who has anyone used to chamber their 6PRC? I plan to shoot 109 hybrids and 110 A tips. I have just at 3 inches in the magazine on this setup.

Anyone have a good barrel maker they used for this cartridge?

 

[dfanonymous]

Anyone who smiths that has a reamer for a 6 PRC…

My go to guy is Chad a LRI

 

[wasskeet]

I had Travis @ TS Customs chamber a Benchmark in 6 PRC for me. He does first class work and gets things done quickly.

 

[Tidus56]

Anyone who smiths that has a reamer for a 6 PRC…

My go to guy is Chad a LRI

I haven't found too many with the 6 PRC reamer was actually the issue. What is LRI? So I can reach out to Chad.

 

[Huntnful]

@Barehandlineman11 has my reamer for lapua brass and 108/109 ELDM's. It has a .200 freebore and put a 108 ELDM at 2.955" .020 off the lands and a 109 ELDM at 2.980" .020 off the lands. I believe the 109 ELDM is just a 110 a tip with a plastic tip.

109 Hybrid may sit too far out FYI

 

[Austin_Michael]

I haven't found too many with the 6 PRC reamer was actually the issue. What is LRI? So I can reach out to Chad.

LRI = LongRifles, Inc