300 WSM ADG Brass. In Stock. 50 ct. – Shoot-Long
www.shoot-long.com
300 PRC load info
- Thread starter 8andbait
- Start date
Help Support Long Range Hunting Forum
www.shoot-long.com
dirtytough
Well-Known Member
Fed 215m
Hornady 1x fired brass
215 Berger
78 grains RL 26
I was @3057 fps in a 26" barrel.
As always work up.
Hornady 1x fired brass
215 Berger
78 grains RL 26
I was @3057 fps in a 26" barrel.
As always work up.
bryanfields
Well-Known Member
- Joined
- Aug 23, 2015
- Messages
- 129
Wow, I'd love to get near that velocity! Planning to start RL26 at 76 grains. Thanks!
24" Proof, Kelbly action
78 gns RL23, 215M, ADG brass full length sized
COAL 3.600, 178 Absolute Hammer
3190 fps
(Bull Elk & Red Stag, DRT last 3 weeks)
Seekins Havak
79.5 gns RL23, 215M, Hornady brass neck sized only
COAL 3.600, 178 Absolutely Hammer
3191 fps
78 gns RL23, 215M, ADG brass full length sized
COAL 3.600, 178 Absolute Hammer
3190 fps
(Bull Elk & Red Stag, DRT last 3 weeks)
Seekins Havak
79.5 gns RL23, 215M, Hornady brass neck sized only
COAL 3.600, 178 Absolutely Hammer
3191 fps
bryanfields
Well-Known Member
- Joined
- Aug 23, 2015
- Messages
- 129
Wish I could find some RL23. Did you test it against RL26 or H1000? Thanks!
No, I did not. The Absolute Hammers typically require a faster powder than typical weight/type bullets so I went with the RL23. H1000 and RL26 would be what I'd use with the 215 Berger or similarly larger gn bullet, though. I believe that combination would provide the best results in that recipe.
I apologize, the "renewed" question wasn't really answered with my earlier response. i was just answering initial 300 PRC load dat question.
Last edited:
bryanfields
Well-Known Member
- Joined
- Aug 23, 2015
- Messages
- 129
No worries. That still helps if I need to go with a lighter bullet. Thanks so much.
Squatch
Well-Known Member
Anyone have any good data for the 205 Bergers in the 300PRC
Weatherby Fan
Well-Known Member
I had great success with R26 and the 210 Berger's
